.

GX-N 100G Military Vehicles Tank Vibration Isolator

GX-N 100G military defense vibration isolator is total different from the GH series.

With oval rubber pad in, the big impact shock of this model can be up to 100G. The nominal load of GX-N is from 10N (1.02kg) to 60N (6.12kg).With the oval type rubber pad in, combined tightly with the wire rope rolled around the mounting bars, this GX-N model has perfect performance in anti-shock. Even in the extreme environment under the huge shock, the GX-N model vibration isolator can always be superb steady.

The low efficiency of side direction of the GX-N series has improved much in this new product, which can be used in any exquisite equipmentor systems which require for .

With the characteristic of anti-shock of 100G, the GX-N vibration isolator is especially recommended for the use of reducing vibration shock in the field of military defense. Like land system, rocket missile system, ballistic protection system, air defense system, naval system, precision guided missiles, fuze system, test capabilities, motor drive, etc.

Besides, the GX-N 100G military defense vibration isolator can also be used widely in the field of highway transportation, marine, shipborne, navy, photographic equipment, aerial equipment, communication apparatus, electronic sensing devices, mobile electronic devices, cameras or any other needed working conditions.

Synthesis Of High Damping Reinforced Isolator

At present, all kinds of equipment for isolation and shock absorption include various combinations of steel - lead - rubber bearings, soft steel dampers, oil dampers and lead extrusion dampers, which usually use different materials with different characteristics to be manufactured and assembled, and the production process is complex. In addition, this type of isolator is suitable for different types of houses, bridges and building structures. Therefore, according to the characteristics of equipment isolation, the development of special isolation materials is the foundation of equipment isolation research. In order to effectively absorb and dissipate the vibration energy transmitting to equipment and improve the energy dissipation effect of the system, the materials developed should have a certain initial stiffness and large deformation and energy dissipation capacity, in order to not only have the required bearing capacity but also achieve the effect of isolation and energy dissipation. In addition, it should also be suitable for China's national conditions and has the characteristics of low cost and high quality. It should also meet the requirements of oil resistance, heat resistance and mild aging under different working conditions of equipment.

To this end, through repeated tests, screening formula, with rubber as the base material and supplemented by special filler and processing aids, use inflation molding process, through mixing, inflatable molding, vulcanization and other processing steps to form a new type of high damping enhanced isolation material. Inside this special material, there are a uniform distribution of pores, and the combination of special filler and rubber base is A combination of physics and chemistry, forming a three-dimensional reticulation structure with the following characteristics:

1. The mechanical properties of materials can meet different requirements by adjusting the recipe control of fillers and auxiliaries.

2. The three-dimensional reticulation structure increases the damping value of the material. In the static state, the structure is stable. In the dynamic state, the structure reduces the modulus of the material because of the cumulative damage, which is beneficial to the dynamic isolation requirement especially under the condition of large deformation.

3. The special filler has the effect of absorption and energy dissipation. It absorbs kinetic energy and convert it into heat energy and at the same time convert the material, which not only increases the dynamic damping value, but also reduces the elastic modulus of the material.

The typical shear - shear displacement curve of the material is as shown in the figure, which can be expressed by bilinear model and the mechanical properties of the material can be obtained by adjusting the gradation and processing technology of the raw materials.



在线联系供应商

至: Xi\'an Hoan Microwave Co., ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

JMZ-T1 Industrial Anti Vibration Isolator Dampers & Mounts
JMZ-T1 Industrial Anti Vibration Isolator Dampers & Mounts JMZ-T1 anti vibration mount has the static load from 0.45kg to 1.4kg, which has small size than any other kind vibration mounts. For its unique sm...
JMZ-T Rubber Vibration Damping Sandwich Mounts
JMZ-T Rubber Vibration Damping Sandwich Mounts The JMZ-T seriesvibration damping sandwich mountsis the new designed model, which is designed especially for the military use. Comparing with the w...
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount Rubber vibration isolator is the most widely used vibration isolator, it is widely used in various fields like the vehicle, shipping, automobile, p...
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount JMZ-1-2.0B rubber vibration absorber belongs to the JMZ-1 series. It adopts the structure of double spring and special friction plate. It has good ...
JGX-0958 Vibration Isolation Dampers Products For Multi Application
JGX-0958 Vibration Isolation Dampers Products For Multi Application Xi'an Hoan's extensive range of stainless steel wire rope isolators and elastomeric shock mounts, most equipment can be suspended successfully. Exa...
供应产品

Same products

Carbide Wood Lathe Knife CNC Lathe Cutters for Woodturning Lather Machine
Carbide Wood Lathe Knife CNC Lathe Cutters for Woodturning Lather Machine 卖方: SUZHOU RICO MACHINERY CO., LTD Carbide CNC Wood Lathe Knifes for Woodturning CNC Lather Machine Thisis a new design carbide wood...
PCD Milling Cutter
PCD Milling Cutter 卖方: LINKUT PRECISION TOOLS CO.,LTD PCD diamond milling cutters mainly include: PCD (diamond) welding forming milling cutter, PCD end...
Monocrystal Diamond Chamfering Tool
Monocrystal Diamond Chamfering Tool 卖方: LINKUT PRECISION TOOLS CO.,LTD Mono crystal diamond (MCD or SCD) tools (such as chamfering and milling cutter) are currently the...
PDC Cutter Insert
PDC Cutter Insert 卖方: LINKUT PRECISION TOOLS CO.,LTD LINKUT delivers high-performance polycrystalline diamond compact (PDC) products for oil&gas drill...
VCGW PCD Inserts
VCGW PCD Inserts 卖方: LINKUT PRECISION TOOLS CO.,LTD Diamond cutting tools are divided into natural diamonds and synthetic diamonds. Synthetic diamond...