jmy505 50ohm coaxial cable rfid reader and writer modules
JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.
- Qualifications:
- • PCD: MF RC500, RC531, RC632, RC400
- • Working frequency: 13.56MHz
- • Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
- • RF standard: ISO14443A, ISO14443B, ISO15693
- • Operating distance: 100mm(depending on card and antenna design)
- • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- • EEPROM: 512 Bytes
- • Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
- • Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
- • Max.command length: 511 Bytes
- • Interface level: 3.3V(TTL level; 5V tolerance)
- • Power supply: DC 5.0V
- • Power consumption: 70mA
- • Dimension: 42mm×21mm×8mm
- • Package: DIP32
- • Weight: about 15g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • ISP: Supported
- • RoHS: Compliant
Send product request
Other supplier products
 |
13.56MHz ISO14443, ISO15693 RFID Reader and writer Module JMY607 | JMY607 series are RFID reader/writer module with IIC or UART serial ports. JMY607 has various functions and supports multi ISO/IEC standard of cont... |
 |
3 SAM slots hf 13.56mhz rfid reader/writer - MR790 | MR790 series, based on NXP PCD or compatible PCD, is the high performance USB PC/SC interface desktop reader. The reader supports series IC cards a... |
 |
RS232C,USB interface HF RFID Reader/Writer Module JMY611 | JMY611 series are RFID reader/writer module which have various functions and support multi ISO/IEC standard of contactless card; the cards from dif... |
 |
NXP RC522 RC523 HF RFID ID card Reader Module JMY609 | JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard... |
 |
MCU ARM7 HF RFID Reader/Writer Module JMY610 | JMY610 series are RFID reader/writer module with UART and IIC serial ports. JMY610 has various functions and supports multi ISO/IEC standard of con... |
Same products
 |
Invengo RAIN RFID Fixed Readers | Seller: Invengo Information Technology Co.,Ltd. | As a RFIDcompany, Invengo offers customers a wide range of global protocol compliant RAIN RFID (U... |
 |
YOYIK supplies Acquisition Module ADAM-4024 | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | YOYIK® Data Acquisition Module ADAM-4024 is a popular product from Yoyik. Dongfang Yoyik Engi... |
 |
RFID ISO Contact IC Card | Seller: Shenzhen DTB RFID Co., Ltd. | Description ofRFID ISO Contact IC Card Mifare ic card, rfid ic card, contact ic cardhas a large s... |
 |
RFID Irregular Size Card | Seller: Shenzhen DTB RFID Co., Ltd. | em4305 card,tk4100 card t5577 card/ t5577 rfid card Description ofRFID Irregular Size Card RFID ... |
 |
RFID Inlay | Seller: Shenzhen DTB RFID Co., Ltd. | RFIDdry inlayis an important material in the production process of RFID products. Normally, rfid ... |
