IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY680
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability.
- Qualifications:
- • PCD: NXP RC500, RC531, RC400, RC632
- • Working frequency: 13.56MHz
- • RF standard: ISO14443A, ISO14443B, ISO15693
- • Operating distance: 80mm(depending on card and antenna design)
- • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- • Auto detecting card: Supported, default ON
- • SAM card slot: 1 slot, 9600bps /38400bps
- • EEPROM: 512 Bytes
- • PPSS set: Supported
- • Interface: IIC, UART, RS232C or USB to RS232C Bridge(select while place order)
- • Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps
- • Max.command length: 511 Bytes
- • Interface level: 3.3V (TTL level; 5V tolerance)
- • Power supply: 5.0V
- • Power consumption: 150mA
- • Dimension: 70mm×50mm×16.5mm
- • Weight: about 120g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • ISP: Supported
- • RoHS: Compliant
Other supplier products
|
|
usb hid interface hf 13.56mhz rfid reader - mr761 |
MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data b... |
|
|
3 SAM slots hf 13.56mhz rfid reader/writer - MR790 |
MR790 series, based on NXP PCD or compatible PCD, is the high performance USB PC/SC interface desktop reader. The reader supports series IC cards a... |
|
|
RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620 |
JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. Th... |
|
|
IIC, UART, USB interface HF 13.56MHz RFID writer and reader Module JMY628 |
JMY628 is a RFID read/write module with UART, IIC or USB port. JMY628 has various functions and supports multi ISO/IEC standard of contactless card... |
|
|
HID standard USB interface HF RFID Reader Module JMY608 |
JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to re... |
All supplier products
Same products
