RS232C interface HF RFID Reader and writer Module JMY603
JMY603 series are RFID reader/writer module with UART serial ports. JMY603 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.
- Qualifications:
- • Authenticated: BCTC(the Bank Card Test Center )--contactless Bank Card LEVEL 1
- • PCD: NXP RC400, RC500, RC531, RC632
- • Working frequency: 13.56MHz
- • RF standard: ISO14443A, ISO14443B, ISO15693
- • Operating distance: 80mm (MIFARE One, typical distance)
- • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- • Auto detecting card: Supported, default OFF
- • EEPROM: 512 Bytes
- • Interface: RS232C
- • Baud rate: BPS
- • Power supply: DC5V
- • Power consumption: 80mA
- • Dimension: 85mm×60mm×10mm
- • Weight: about 25g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
Other supplier products
|
|
arm7 mcu hf 13.56mhz rfid desktop reader and writer with usb pc/sc interface - mr810 |
MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, IS... |
|
|
NXP RC522 RC523 HF RFID ID card Reader Module JMY609 |
JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard... |
|
|
HID standard USB interface HF RFID Reader Module JMY608 |
JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to re... |
|
|
jmy506 iic i2c uart interface hf rfid reader and writer modules |
JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of con... |
|
|
RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620 |
JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. Th... |
All supplier products
Same products
