Surface Mount Package HF RFID Module JMY622
JMY622 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned by impedance analyzer; so the module has excellent read/write performance and stability. Though the wire can reach 10m, but the performance is good. Normally the wire should be 60cm that is the module's best performance and stability. JMY622 adopts surface mount installation form. Small size is a major feature of JMY622. JMY622 has many kinds of funtions and it can support various contactless IC card under international standards. Meanwhile it can support the cards from different suppliers. Designer classified&integrated the operation commands for contactless IC cards. In this situation, the uesr can operate it easily via sending simple commands. The most important features for JMY622 is that it can support contactless IC cards(T=CL) fully. It can send and receive more than 256 Bytes APDU commands and also support FSDI=8.
- Qualifications:
- • PCD: NXP SL RC400, NXP MF RC500, NXP MF RC531, NXP CL RC632
- • Working frequency: 13.56MHz
- • RF standard: ISO14443A, ISO14443B, ISO15693
- • Operating distance: 100mm(depending on card and antenna design)
- • Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
- • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- • Auto detecting card: Supported, default OFF; Can be set.
- • Interface: IIC, UART(selected by SPS pin, recommend to use IIC)
- • Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps
- • Max.command length: 511 Bytes
- • Interface level: 3.3V (TTL level; 5V tolerance)
- • Power supply: DC 3.3V + 5V(±0.5V)
- • Power consumption: 100mA
- • Dimension: 22mm×35mm
- • Package: Surface Mount
- • Weight: about 10g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • ISP: Supported
- • RoHS: Compliant
Send product request
Other supplier products
 |
MCU ARM7 HF RFID Reader/Writer Module JMY610 | JMY610 series are RFID reader/writer module with UART and IIC serial ports. JMY610 has various functions and supports multi ISO/IEC standard of con... |
 |
jmy505 50ohm coaxial cable rfid reader and writer modules | JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of con... |
 |
hf 13.56mhz rfid reader/writer LCD display with arm7 mcu - mr800 | MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User c... |
 |
ethernet RJ45 interface hf 13.56mhz rfid reader writer - mr730 | MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The rea... |
|
|
Surface Mount Package HF RFID Module JMY622 | JMY622 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards.... |
Same products
 |
Invengo RAIN RFID Fixed Readers | Seller: Invengo Information Technology Co.,Ltd. | As a RFIDcompany, Invengo offers customers a wide range of global protocol compliant RAIN RFID (U... |
 |
YOYIK supplies Acquisition Module ADAM-4024 | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | YOYIK® Data Acquisition Module ADAM-4024 is a popular product from Yoyik. Dongfang Yoyik Engi... |
 |
RFID ISO Contact IC Card | Seller: Shenzhen DTB RFID Co., Ltd. | Description ofRFID ISO Contact IC Card Mifare ic card, rfid ic card, contact ic cardhas a large s... |
 |
RFID Irregular Size Card | Seller: Shenzhen DTB RFID Co., Ltd. | em4305 card,tk4100 card t5577 card/ t5577 rfid card Description ofRFID Irregular Size Card RFID ... |
 |
RFID Inlay | Seller: Shenzhen DTB RFID Co., Ltd. | RFIDdry inlayis an important material in the production process of RFID products. Normally, rfid ... |
