HID standard USB interface HF RFID Reader Module JMY608
JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to read and output the card data. JMY608 is reader module with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab and so on after the output of the number and the data of the card. The default of the JMY608 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader.
- Qualifications:
- • PCD: NXP RC400
- • Working frequency: 13.56MHz
- • RF standard: ISO15693
- • Operating distance: 100mm
- • SAM card slot: no
- • Interface: USB (HID standard)
- • Power supply: DC5V
- • Power consumption: 110mA
- • Dimension: 85mm×58mm
- • Weight: about 100g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
Other supplier products
|
arm7 mcu hf 13.56mhz rfid desktop reader and writer with usb pc/sc interface - mr810 |
MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, IS... |
|
jmy505 50ohm coaxial cable rfid reader and writer modules |
JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of con... |
|
IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY6801 |
JMY6801 is a RFID read/write module with UART, IIC, RS232C or USB port. JMY6801 has various functions and supports multi ISO/IEC standard of contac... |
|
13.56MHz RFID Reader and writer Module JMY604 with RS232C interface |
JMY604 series are RFID reader/writer module with UART serial ports. JMY604 has various functions and supports multi ISO/IEC standard of contactless... |
|
usb hid interface hf 13.56mhz rfid reader - mr761 |
MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data b... |
All supplier products
Same products