OLP-XH-OLP-1-1-M
Description:
XH-OLP-1-1-M optical protection module is mainly used in optical fiber transmission, the main fiber and the backup fiber fault judgment automatic switching. In the optical network signal link, when the main fiber optical signal exceeds the set optical power alarm value (such as power down the set threshold value, including no light), the module automatically switches from the main fiber to the backup fiber optical path, and vice versa when the backup fiber fails to break the fiber, the module automatically switches back to the main fiber (the module detects whether the optical path is normal, and only normal optical path can be automatically switched). The module supports RJ45 Ethernet and serial RS-232 communication, and the module status information can be queried by command.
Features:
●With low insertion loss and high reliability
●Real-time monitoring of the status of the main and standby fiber optic signals
●The optical path can be switched manually and automatically
●Support Ethernet and serial communication control
Performance
| Parameter | Parameter Values |
| Moldel | XH-OLP-1-1-M |
| Insertion Loss (dB) | Typ：1.0 Max:1.5 |
| Wavelength Range (nm) | 1260~1650 |
| Monitoring Wavelength (nm) | 1550 |
| Return Loss (dB) (nm) | ≥50 |
| Corsstalk (dB) | ≥505 |
| Optical power threshold automatic switching value（dBm） | Can be set -10、-15、-20、-25、-30、-35 |
| Fiber connection interface | FC/PC FC/APC |
| Power down state | Maintain optical path |
| Communication method | RJ45 or RS-232 |
| Lifetime（Times） | ≥107 |
| Switching Time（ms） | ≤10 |
| Transmitted power（mW） | ≤500 |
| OperatingVoltage（V） | 5 |
| Operating Temperature（℃) | -20~+70 |
| Storage Temperature（℃ | -40~+85 |
| Dimensions（mm） | (L)104.0×(W)120×(H)28±0.2mm |
Tip: The above are common equipment parameters, if you have other requirements can be customized, optional main fiber monitoring or both main and backup fiber monitoring.
Send product request
Other supplier products
 |
FBG(FIBER BRAGG GRATING INTELLIGENT DEMODULATOR) | Product overview The XH-FBG fiber grating temperature sensing product is a sensing detection system developed based on (Bragg) grating technolog... |
 |
Mechanical Optical Switch XH-OSW-1×128 | IntroductionXH-OSW-1×128 mechanical optical switch is a kind of light path control equipment.It can realize multi-channel fiber optic light p... |
 |
Optical Switch XH-OSW-2X2F | XH-OSW-2X2F optical switch is a kind of optical path control device, which has the function of controlling the optical path and converting the op... |
 |
MEMS optical switch 1X4 | MEMS optical switch 1X4 are based on microelectromechanical systems technology. By rotating the mirror of the MEMS chip, channel selection is allow... |
 |
Optical Switch 1X2 | XH-OSW-1X2-optical switch is an optical path control device with the function of controlling the optical path and converting the optical path; it c... |
Same products
 |
GPEM2008-D Series Up to 6×10/100BaseT(X)+2×100M SFP Managed Industrial Ethernet Switch | Seller: GPSENKE Network ICT | The GPEM2008-D series is a managed industrial Ethernet switch equipped up to 2×10/100M opti... |
 |
Factory OEM ODM 8 Port Network 48V 10/100Mbps POE Switch Standard AF/AT Poe 30W Ethernet Switch 8 Port POE Switch | Seller: Shenzhen Gzcom Communication Co., Ltd. | 8 Port POE Switch using high-quality high-speed network IC and the most stable PoE chip, PoE Port... |
 |
Factory OEM ODM 8 Port Network 48V 10/100Mbps POE Switch Standard AF/AT Poe 30W Ethernet Switch 8 Port POE Switch | Seller: Shenzhen Gzcom Communication Co., Ltd. | 8 Port POE Switch using high-quality high-speed network IC and the most stable PoE chip, PoE Port... |
 |
Waveguide Isolator | Seller: UIY Inc. | UIY Inc. RF Waveguide Isolator Custom Design available: •Operating Frequency 2.4GHz to 11... |
 |
GP-3048P new generation 10Gbps POE Switch | Seller: GPSENKE Network ICT | The GP-3048P is an new generation of all-Gigabit POE switch. It is Gigabit SFP optical interface ... |
