ICP222-2F-2CI
DIN-Rail Mounting 2-CAN Server
Support 2 CAN ports to 2 100M Ethernet fiber ports
Adopt SW-Ring ring network patent technology and support single ring function. Automatic recovery time from network failure is <20ms
Support multiple operating modes like TCP Server, TCP Client, UDP and TCP Auto
Support 5K~1000Kbps arbitrary baud rate
Support 12~48VDC wide voltage input
Support -40～75℃ wide operating temperature range
ICP222-2F-2CI is a CANserverthat has integrated 2 CAN ports and 2 Ethernet ports internally. It can implement interconnection between CAN-Bus network and Ethernet network easily to further extend the communication range of CAN-Bus network. It supports 2 CAN to 2 100M Ethernet fiber port and adopts DIN-Rail mounting which can meet the requirements of different scenes.
CAN server supports various network protocols, such as TCP, UDP, TELNET, SW-Ring, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each CAN supports 4 TCP or UDP session connections and multiple operating modes like TCP Server, TCP Client, UDP and TCP Auto. Moreover, it supports WEB, TELNET, and other access modes. It can provide users with good experience via friendly design of network management system interface, simple and convenient operation.
DIP switch could implement restoring factory setting and accessing terminal resistor. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, building automation, healthcare automation system, measuring instrument and environment monitoring system, etc.
Features and Benefits
Support 2 100Base-FX Ethernet fiber ports
Support 5kbps~1000kbps line-speed non-blocking communication
Support multiple operating modes like TCP Server, TCP Client, UDP and TCP Auto
SW-Ring could implement network redundancy and prevent network storm
Support cross-gateway and cross-router communication
Support time setting for heartbeat and overtime disconnection, which can disconnect idle TCP automatically
Support CAN port status and parameter monitoring, making communication state clear to be seen
Support automatic reconnection from network interrupts to establish reliable TCP connection
Flexible CAN data framing setting can meet user’s various needs in data partition
TCP support multi-connection, which enables up to 4 users to monitor and manage CAN device simultaneously
Stand-alone or multi-device communication is supported in UDP mode, which enables multiple users to monitor or manage CAN device simultaneously
Support multiple configuration forms like Windows configuration tool, TELNET and WEB
Ethernet
Standard: IEEE 802.3u for 100Base-FX
Protocol:TCP, UDP, ARP, HTTP, SW-Ring, TELNET, ICMP, DHCP, DNS
Port quantity: 2
Ring network configuration: single ring
Transmission speed: 100M
Interface form: SC/ST/FC
Duplex mode: full duplex
Transmission distance:
Multimode: 2km
Single mode: 20/40/60/80/100/120km
Transmission wavelength:
Multimode: 1310nm
Single mode: 1310nm or 1550nm
Operating mode: 4 sessions, support operating modes likeTCP Server, TCP Client, UDP, TCP Auto, advanced TCP Server and advanced UDP
CAN Interface
Standard: CAN2.0A, CAN2.0B
Interface quantity: 2 CAN ports
CAN signal: CANH, CANL
Duplex mode: 2-wire Half Duplex Mode
Baud rate: 2.5kbps-1000kbps
Load capacity: support concurrent transmitting of 110 nodes
Transmission distance: 40m~10km
Interface form: adopt 4-pin 5.08mm pitch terminal blocks
Terminating resistor: optional external 120Ω terminating resistor
Interface protection: 2kVAC isolation protection
Console Port
CLI command line management port (RS-232), RJ45
Configuration Method
WEB configuration management, TELNET configuration, Windows configuration tool
Redundancy Technology
SW-Ring
LED Indicator
Power supply indicator, running indicator, Ethernet fiber port indicator, CAN port indicator
Power Requirement
12~48VDC
3-pin 7.62mm pitch terminal blocks
Support non-polar connection
Power Consumption
Full-load: 3.00W@24VDC
Environmental Limit
Operating temperature: -40~75℃
Storage temperature:-40~85℃
Relative humidity: 5%～95%(no condensation)
Physical Characteristic
Housing: IP40 protection, metal
Installation: DIN-Rail mounting
Dimension (W x H x D): 35mm×110mm×95mm
Weight: 374g
Industrial Standard
IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
Air discharge: ±8kV
Contact discharge: ±6kV
IEC 61000-4-4 (EFT, electrical fast transient), Level 4
Power supply: ±4kV
IEC 61000-4-5 (Surge), Level 3
Power supply: common mode±2kV, differential mode±1kV
CAN port: common mode±2kV, differential mode±1kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification
CE, FCC, RoHS
Warranty
3 years
Available Models
100M Fiber Port
CAN
Power Supply
ICP222-2F-2CI
2
2
12~48VDC
3onedataprovides unmanaged switch,4G router, 3onedata converter, 10g ethernet switch and etc. For more info, contact us.
Send product request
Other supplier products
 |
CAN to RS232/485 Converter | CAN485 CAN Bus to RS485 Converter Support data conversion between 1 CAN port and 1 RS-485 serial port Support multiple conversion modes like tra... |
 |
IRT5300-AW-5T2D | IRT5300-AW-5T2D Industrial Strength WiFi Router Industrial 4G routerssupport 5 100M copper ports (one of them supports PoE power receiving), 2 RS... |
 |
SW4485I | 4-port RS485 HUBwith Isolation Support 1 RS-232/485 upper computer port, and 4 RS-485 lower computer port Each lower computer port can connect to... |
 |
CAN to RS232/485 Converter | CAN-Bus Device Server CAN485 can bus to rs485 converter can rs232 CAN to RS-232 Interface Converter More Founded in 2001 3onedatahas been dedicat... |
 |
IES3000 Series | Industrial 12-port Full Gigabit Managed Bypass Ethernet Switch Support 8 gigabit copper ports (Optional PoE), 4 gigabit SFP slots and 2 ethernet b... |
Same products
 |
GP-AC1200 Wireless Dual Band WiFi5 Router | Seller: GPSENKE Network ICT | The AC1200 Wireless Router supports data rates up to 1200 Mbps in 2.4 GHz band & 5 GHz band, ... |
 |
GP-R650 Outdoor 5g Wireless Router WiFi router 3G\\4G\\5G | Seller: GPSENKE Network ICT | GP-R650 series industrial grade 5g router is a new generation of wireless router independently de... |
 |
Industrial Equipment - Wi-Fi Router Board | Seller: Aus.Linx Technology Co., Ltd. | Application: Canada Farm Monitoring System The concept of IIoT (Industrial Internet of Things)... |
 |
LTE Router | Seller: Aus.Linx Technology Co., Ltd. | Being an experienced Wi-Fi and 4G router manufacturer, we have been producing a wide range of h... |
 |
Wireless Network Product - 2400AC Wi-Fi Router | Seller: Aus.Linx Technology Co., Ltd. | Being an experienced Wi-Fi and 4G router manufacturer, we have been producing a wide range of h... |
