Individual Bar Chair
Individual Bar Chairs are used to support wide-spaced light steel in slab/deck construction. It is in 3/4", 1", 1-1/2", and 1-3/4" heights.
High Chairs for Metal Decking
High Chairs for Metal Decking are made with different length legs to fit design of a metal deck.
Individual High Chairs
Individual High Chairs are designed to support upper slab steel from mat steel. It also may be used on fill to obtain leg bearing. Their heights are from 2" to 20". Height is from underside of cross bars to seat for reinforcing bar at top of chair. Also available with plastic tip or epoxy coated.
Special High Chairs
Special High Chairs are used for supporting upper slab/deck steel directly or by means of a carrier bar. When heights exceed 12", legs are reinforced with welded cross wires or encircling wire. It is in 2" to 20" heights.
Individual High Chair with Plate
Individual High Chair with Plate is used for supporting lower slab steel on fill or other soft material.
Other supplier products
|
|
Pipe-Line Reinforced Mesh |
Pipe-Line Reinforced Mesh is Pipe-line Reinforced welded wire mesh. It is mainly used for concrete weight coated subsea pipelines.
Specifications ... |
|
|
Continuous High Chair |
Continuous High Chair with Plastic tip provides support for upper slab steel from slab form. It Height is from 2" to 15" in 5'-0" lengths. Legs are... |
|
|
Individual Bar Chair |
Individual Bar Chairs are used to support wide-spaced light steel in slab/deck construction. It is in 3/4", 1", 1-1/2", and 1-3/4" heights.
High Ch... |
|
|
Concrete Wire Mesh |
The longitudinal and transverse reinforcement bars are welded into concrete wire mesh. The concrete meshes have a more dense spacing of the steel b... |
|
|
Reinforcing Welded Mesh |
Reinforcing welded mesh is that the high tensile wires are welded into a rectangular mesh grid fabric. The reinforcing welded mesh is generally man... |
All supplier products
Same products
