FRP sheet for wall ceiling and partition
Daison FRP WALL and CEILING PANELS
Daison fiberglass reinforced plastic (GRP) panels are being produced with continuous lamination technology by Daison Composite Materials Co.,ltd. Daison FRP panels are new generation building materials which are specially engineered for buildings where minimum maintance and maximum sanitation is required.
Features
Resistant Against Moisture
FRP materials are resistant against moisture. They do not rust, corrode and do
not allow formation of mold and mildew.
Ease of Cleaning
Dirt and grease could be cleaned off easily. The panel is highly resistant against
chemicals and stains.
Tough
Daison FRP panels are highly resistant against impacts, scratches and abrasion.
Easy to Install
FRP panels could be easily drilled and cut.
Accessories
The nylon moldings and rivets are available
COMMON APPLICATIONS
* As suspended ceilings * As door panels for PVC frames * Refrigerated warehouses
* Food processing plants * Hospitals * Medical laboratories * Chemical laboratoriesTECHNICAL SPECIFICATIONS
Thickness : 0.8mm—6mm
Finish : Get coat. or sub gloss
Colors: white, almond, beige, grey, ivory, RAL colors
Flexural strength : 1.200 kg/cm2 (17.000 PSI)
Flex modulus : 42.180 kg/cm (2600.000 PSI)
Tensile strength: 565 kg/cm2 (8.000 PSI)
Tensile modulus: 66.560 kg/cm2 (943.000)Barcol
Barcol hardness: 50
Water absorption: 0.17
Available fire grades: Class A - Class C ( ASTM E-84 ), Class 1 -3 (BS 476-7)
Available sizes: 4'*8' (122 cm * 244 cm) & please ask for availability of other sizes.CHEMICAL AND CORROSION RESISTANCE
Some of the common chemicals which FRP sheets against are as follows:
CHEMICAL CONCENTRATION*
Acetic Acid 5 %
Chloric Acid 10 %
Nitric Acid 10 %
Sulphuric Acid 30 %
Etyl Alcohol 95 %
Benzyl 30 %
Toluol 30 %
Carbon Sulphur 30 %INSTALLATION
DAISON FRP panels should only be installed over solid wall surfaces (wood, plasterboard, etc.). Wall surfaces should be clean, flat, dry and smooth. Unsmooth wall surfaces should be made flat for best results. Liner panels will form to the contour of the wall surface when attached. Clips or caulking are recommended to hold ceiling panels in place.
STORAGE & PREPARATION
Daison FRP panels should be stored in a dry area. It is not recommended to store panels outdoors. Panels should be unwrapped and removed from skid and stacked on a flat, dry surface.
Standard fire-safety precautions should be taken when storing and using panels.
Other supplier products
All supplier products
Same products
