black iron fittings
A Black Iron union tail is a detachable fitting used for accessory replacement. It’s part of a union and typically consists of a male tail, a female head, and a union nut. These components allow for easy disassembly and reassembly. They’re commonly used in plumbing and pipework applications for water, oil, gas, and petro-chemical systems.
The material used for these union tails is often malleable cast iron, which ensures high mechanical properties. The best mechanical properties of the material are KTH330-08 malleable cast iron. All standards exceed international regulations.
Jianzhi’s union tail has a high standard; it can be used on our Jianzhi pipe unions without any problems. Our plumbing fittings wholesale ensure high quality from the raw material. Jianzhi’s withthe high quality helps our customers win the market.
We use an electric furnace for melting, and its stability can ensure 100% qualified material. After casting, the pipe fittings black are specially kept at a temperature of 95 °C, i.e., slow and uniform cooling occurs. This leads to a decrease in internal stresses and an increase in tensile strength, so pipe fittings are not prone to breakage. The pipe thus obtains better plasticity and can be used in high pressure and high temperature environments.
ProductParameters
|
Size： |
1/8”-6”(DN6-DN150) |
|---|---|
|
Standard: |
EN10242 / ANSI / ASME B16.3 / DIN2950 / IS0 49 / NBR6943 / IS1879 / BS EN10242 |
|
Threaded Standard: |
EN10226 / ASME B.1.20.1 / DIN2999 / ISO7-1 / ISO228 / IS554 / BS EN10226 |
|
Work Pressures： |
PN25 / 2.5Mpa / 363PSI /CLASS 150 / 25Bar |
|
Certification： |
UL Listed /FM Approved /CE /ABNT /TSE /SNI /ISI |
Send product request
Other supplier products
|
|
black iron fittings | A Black Iron union tail is a detachable fitting used for accessory replacement. It’s part of a union and typically consists of a male tail, a... |
 |
g.i coupling | A is an essential component in plumbing and piping systems used to connect, control, and direct the flow of fluids such as water, gas, and other l... |
 |
black iron fittings | A Black Iron union tail is a detachable fitting used for accessory replacement. It’s part of a union and typically consists of a male tail, a... |
 |
45 degree elbow pipe | If you’re working on a plumbing project, you may have encountered the term “45 degree plumbing elbow.” But what exactly is it, an... |
 |
90 degree elbow pipe | To understand the basic knowledge of an elbow, the determination of an elbow must know the diameter, radius, and angle of the elbow, and some have ... |
Same products
 |
pipe union fitting | Seller: Jianzhi Pipe Fittings | Union pipe fitting / Pipe union A is a threaded fitting which allows the pipe work to be separa... |
 |
5 way pipe fitting | Seller: Jianzhi Pipe Fittings | Cross pipes are an essential part of any piping system, connecting different pipes and allowing f... |
|
|
45 degree elbow pipe | Seller: Jianzhi Pipe Fittings | If you’re working on a plumbing project, you may have encountered the term “45 degree... |
 |
male to female pipe fittings | Seller: Jianzhi Pipe Fittings | Cross pipes are an essential part of any piping system, connecting different pipes and allowing f... |
 |
4 way pipe connector | Seller: Jianzhi Pipe Fittings | are multi-joint fittings that connect four pipe sections together at a central junction point. T... |
