.

HDPE Siphon Pipe

HDPE Siphon Pipe

Siphon rainwater drainage system is a new technology which is developed very fast in Europe, American, Japan, South-American, Asia and Africa countries. It is a more scientific and advanced technology, can be used on big construction building like factory, workshop, warehouse and public building. The inner drainage system has obviously advantages comparing with the traditional gravity current drainage system.

HDPE Siphon Pipe, HDPE Drainage Pipe, HDPE Corrugated Pipe,HDPE Trenchless Pipe, HDPE Water Supply Pipe, HDPE GSHP pipe,HDPE Pipe FittingsFactory.

Specification

Straight Series

Nominal Diameter

S16

S25

DN

(mm)

Tolerance (mm)

Wall Thickness (mm)

PN

(Mpa)

Wall Thickness

(mm)

PN

(Mpa)

32

+0.3

40

+0.4

50

+0.5

63

+0.6

75

+0.7

90

+0.8

110

+0.8

125

+0.9

160

+1.0

200

+1.1

250

+1.3

315

+1.5

Coil Series

Nominal Diameter

S16

Length: M/Roll

DN

(mm)

Tolerance

(mm)

Wall Thickness

(mm)

PN

(Mpa)

32

+1.4

50, 100, 200, 300, 500

40

+1.5

50

+1.6

50, 100, 200

63

+1.7

50, 100

Properties

Project

Requirement

Longitudinal reversion(110℃)

≤3% No delamination, cracking and blistering

MFR

(5kg, 190℃)/(g/10min)

The MFR difference between the raw material particles should not exceed 0.2

Oxidation induction time

(200℃/min)

≥20

Hydrostatic strength test

(80℃, 165h, 4.6Mpa)

No broken, no leakage

Ring stiffness (KN/m3)

Only for the pipes with a “BD” represents

SR≥4

Combustion toxicity index

≤1

System Composition

The siphon drainage system is mainly composed of rainwater head, fastening systems,HDPE pipe and the corresponding design

Tengyuan can supplymunicipal engineering pipe, dredging engineering pipe,HDPE Gas Pipe, Power Engineering Pipe,Mining Pipeand agriculture irrigation pipe, etc. Integrity is the foundation of us, as well as the guarantee for enterprise's sustainable development.

System Advantages

Compared with the traditional gravity drainage system, the siphon drainage system has advantages as follows:

Features:

level is0 (the lowest)and no mildew material. Compared with some other commonly used plastic material, PE is much mildew resistance and it could be used for a long time without fouling.



Send product request

To: Shandong Tengyuan Building Materials Technology Co.,Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Rubber Hose
Rubber Hose Rubber Hose The rubber hoses are used with dredgers for sand conveyance. It is normally installed between the HDPE pipes, ensure the whole pipelin...
HDPE Dredging Pipe
HDPE Dredging Pipe HDPE Dredging Pipe Detailed Information: Specification ID OD Working Pressure Burst Pressure mm mm Mpa...
HDPE Drainage Pipe
HDPE Drainage Pipe HDPE Drainage Pipe Specifications DN(mm) Wall Thickness SN2 SDR33 SN4 SDR26 SN8 SDR21 Min Ma...
Rubber Hose
Rubber Hose Rubber Hose The rubber hoses are used with dredgers for sand conveyance. It is normally installed between the HDPE pipes, ensure the whole pipelin...
HDPE Pipe for Drawing Out Methane
HDPE Pipe for Drawing Out Methane HDPE Pipe for Drawing Out Methane Tengyuan HDPE mining pipes are made of special polyethylene-based raw materials with flame-retardant and anti-st...
All supplier products

Same products

Simplex Armored Optical Fiber Cable
Simplex Armored Optical Fiber Cable Seller: Zhejiang Flexible Technology Co., Ltd Simplex Armored Optical Fiber Cable 1、Protected by mini diameter stainless steel tube 2、Avoid imp...
Flexible Metal Conduit Water Proof - PEG23LSZH Series
Flexible Metal Conduit Water Proof - PEG23LSZH Series Seller: Zhejiang Flexible Technology Co., Ltd Flexible Metal Conduit Water Proof- PEG23LSZH Series Waterproof Flexible Metal Conduit, PEG23LSZ...
Household Mould 1104
Household Mould 1104 Seller: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD Household Mould Description Mainly for pressure molding, the cavity pressure should be considere...
BMC/SMC Mould
BMC/SMC Mould Seller: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD BMC/SMC plasticMoulding Description: We mainly use injection molding and pressure molding as the...
Shell Moulding
Shell Moulding Seller: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD Shell Moulding Description Mainly for injection molding, the cavity pressure should be considere...