.

HDPE Siphon Pipe

HDPE Siphon Pipe

Siphon rainwater drainage system is a new technology which is developed very fast in Europe, American, Japan, South-American, Asia and Africa countries. It is a more scientific and advanced technology, can be used on big construction building like factory, workshop, warehouse and public building. The inner drainage system has obviously advantages comparing with the traditional gravity current drainage system.

HDPE Siphon Pipe, HDPE Drainage Pipe, HDPE Corrugated Pipe,HDPE Trenchless Pipe, HDPE Water Supply Pipe, HDPE GSHP pipe,HDPE Pipe FittingsFactory.

Specification

Straight Series

Nominal Diameter

S16

S25

DN

(mm)

Tolerance (mm)

Wall Thickness (mm)

PN

(Mpa)

Wall Thickness

(mm)

PN

(Mpa)

32

+0.3

40

+0.4

50

+0.5

63

+0.6

75

+0.7

90

+0.8

110

+0.8

125

+0.9

160

+1.0

200

+1.1

250

+1.3

315

+1.5

Coil Series

Nominal Diameter

S16

Length: M/Roll

DN

(mm)

Tolerance

(mm)

Wall Thickness

(mm)

PN

(Mpa)

32

+1.4

50, 100, 200, 300, 500

40

+1.5

50

+1.6

50, 100, 200

63

+1.7

50, 100

Properties

Project

Requirement

Longitudinal reversion(110℃)

≤3% No delamination, cracking and blistering

MFR

(5kg, 190℃)/(g/10min)

The MFR difference between the raw material particles should not exceed 0.2

Oxidation induction time

(200℃/min)

≥20

Hydrostatic strength test

(80℃, 165h, 4.6Mpa)

No broken, no leakage

Ring stiffness (KN/m3)

Only for the pipes with a “BD” represents

SR≥4

Combustion toxicity index

≤1

System Composition

The siphon drainage system is mainly composed of rainwater head, fastening systems,HDPE pipe and the corresponding design

Tengyuan can supplymunicipal engineering pipe, dredging engineering pipe,HDPE Gas Pipe, Power Engineering Pipe,Mining Pipeand agriculture irrigation pipe, etc. Integrity is the foundation of us, as well as the guarantee for enterprise's sustainable development.

System Advantages

Compared with the traditional gravity drainage system, the siphon drainage system has advantages as follows:

Features:

level is0 (the lowest)and no mildew material. Compared with some other commonly used plastic material, PE is much mildew resistance and it could be used for a long time without fouling.



Отправить запрос, связаться с поставщиком

Кому: Shandong Tengyuan Building Materials Technology Co.,Ltd.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

MPP Cables Protective Pipe
MPP Cables Protective Pipe MPP Cables Protective Pipe Trenchless modified polypropylene (MPP) power cable protective pipe is made by modified polypropylene as the main raw m...
HDPE Dredging Pipe
HDPE Dredging Pipe HDPE Dredging Pipe Detailed Information: Specification ID OD Working Pressure Burst Pressure mm mm Mpa...
HDPE GSHP Pipe
HDPE GSHP Pipe HDPE GSHP Pipe Geothermal pipe transfers heat from the ground into a building to provide space heating and to pre-heat domestic hot water. Geother...
HDPE Steel Mesh Reinforced Pipe
HDPE Steel Mesh Reinforced Pipe HDPE Steel Mesh Reinforced Pipe This products series is a new style of low, medium ,and high pressure resistant composite pipes, taking high stren...
UHMWPE Pipe
UHMWPE Pipe UHMWPE Pipe Ultra High Molecular Weight Polyethylene(UHMWPE for short)pipe is extruded out with 3.5~9.2 million viscosityaverage molecular weight ...
Все товары поставщика

Похожие товары

Simplex Armored Optical Fiber Cable
Simplex Armored Optical Fiber Cable Продавец: Zhejiang Flexible Technology Co., Ltd Simplex Armored Optical Fiber Cable 1、Protected by mini diameter stainless steel tube 2、Avoid imp...
Flexible Metal Conduit Water Proof - PEG23LSZH Series
Flexible Metal Conduit Water Proof - PEG23LSZH Series Продавец: Zhejiang Flexible Technology Co., Ltd Flexible Metal Conduit Water Proof- PEG23LSZH Series Waterproof Flexible Metal Conduit, PEG23LSZ...
BMC/SMC Motor
BMC/SMC Motor Продавец: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD Household Mould Description Mainly for pressure molding, the cavity pressure should be considere...
BMC/SMC Mould
BMC/SMC Mould Продавец: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD BMC/SMC plasticMoulding Description: We mainly use injection molding and pressure molding as the...
Shell Moulding
Shell Moulding Продавец: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD Shell Moulding Description Mainly for injection molding, the cavity pressure should be considere...