Rubber Hose
Rubber Hose
The rubber hoses are used with dredgers for sand conveyance. It is normally installed between the HDPE pipes, ensure the whole pipelines more flexible. Thickness of rubber hose we offer is from 15mm to 80mm. The suitable working temperature is from -30℃ to 50℃. It is convenient to install, flexible to use, abrasion-resistant and bending-resistant.
Tengyuan is specialized in producingUHMWPE Pipe, plastic floater,rubber hose, HDPE dredging pipe andDredging Engineering Pipe, etc. Welcome to contact us, you will be kindly replied in 8 hours and quoted in 24 hours after receiving inquiry.
Detailed Information:
|
Material |
EPDM, Natural Rubber, Silicon, FKM, IIR, NBR, SBR, Sponge Rubber and so on. |
|
Color |
Black or customized. |
|
Hardness |
Shore A |
|
Service |
OEM or ODM services provided. |
|
Tolerance |
±0.05mm |
|
Density |
|
|
MOQ |
1 pc |
Specifications
|
Standard Size |
Working Pressure (Mpa) |
Standard Size |
Working Pressure (Mpa) |
||
|
Inner Diameter (mm) |
Total Length (mm) |
Inner Diameter (mm) |
Total Length (mm) |
||
|
100 |
1000 |
556 |
1500 |
||
|
150 |
1000 |
606 |
1500 |
||
|
200 |
1200 |
650 |
1600 |
||
|
250 |
1200 |
706 |
1800 |
||
|
300 |
1200 |
756 |
1800 |
||
|
350 |
1200 |
800 |
2000 |
||
|
406 |
1200 |
850 |
2000 |
||
|
456 |
1300 |
900 |
2000 |
||
|
506 |
1400 |
||||
|
Total Length:≤100000mm; Working pressure and flanges can be customized. |
|||||
Properties
|
Items |
Index |
Items |
Index |
Items |
Index |
Note |
|
Working Pressure MPa |
≥0.8 |
Tensile Strength MPa |
≥11.8 |
Ageing Resistance |
70ºCx72h |
The parameters follow the standard of HG-T2185-9.The strength layer is 200D/3 cord fabric and the pulling force is 380N for each single root. |
|
Test Pressure MPa |
≥1.2 |
Elongation (%) |
≥400 |
Shore Hardness A |
63±3 |
|
|
Burst Pressure MPa |
≥2.4 |
Ozone Proof |
No Cracking in 48 hours exposing in Ozone |
Adhesion Strength Between Each Layer KN/m |
≥1.0 |
|
|
Conveying Medium |
Muddy, water |
Abrasion |
≤0.395cm³ |
Strength Layer |
4 layers of cord fabric |
Tengyuan can supply municipal engineering pipe,dredging engineering pipe, HDPE Gas Pipe,Power Engineering Pipe, Mining Pipe andagriculture irrigation pipe, etc. Integrity is the foundation of us, as well as the guarantee for enterprise's sustainable development.
Features
Flange Adapter HDPE,HDPE Tee, Pipe Floats,Rubber Suction Hosefor sale.
Send product request
Other supplier products
 |
HDPE Cables Protective Pipe | HDPE Cables Protective Pipe We provide you with high-end quality of power engineering pipe system, covering the HDPE electrical conduit, MPP elect... |
 |
MPP Cables Protective Pipe | MPP Cables Protective Pipe Trenchless modified polypropylene (MPP) power cable protective pipe is made by modified polypropylene as the main raw m... |
 |
HDPE GSHP Pipe | HDPE GSHP Pipe Geothermal pipe transfers heat from the ground into a building to provide space heating and to pre-heat domestic hot water. Geother... |
 |
Plastic Floater | Plastic Floater Detailed Information: Specifications Structure 1 pair of floater contains 2 pieces of floats. Accessories: Bolts, ... |
 |
HDPE Irrigation Pipe Fittings | HDPE Irrigation Pipe Fittings PE agricultural irrigation pipe fittings are practical patent products, which are of high quality and low cost and h... |
Same products
 |
Simplex Armored Optical Fiber Cable | Seller: Zhejiang Flexible Technology Co., Ltd | Simplex Armored Optical Fiber Cable 1、Protected by mini diameter stainless steel tube 2、Avoid imp... |
 |
Flexible Metal Conduit Water Proof - PEG23LSZH Series | Seller: Zhejiang Flexible Technology Co., Ltd | Flexible Metal Conduit Water Proof- PEG23LSZH Series Waterproof Flexible Metal Conduit, PEG23LSZ... |
 |
Household Mould 1104 | Seller: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | Household Mould Description Mainly for pressure molding, the cavity pressure should be considere... |
 |
BMC/SMC Mould | Seller: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | BMC/SMC plasticMoulding Description: We mainly use injection molding and pressure molding as the... |
 |
Shell Moulding | Seller: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | Shell Moulding Description Mainly for injection molding, the cavity pressure should be considere... |
