Malleable Iron Two Socket Cross

Malleable Iron Two Socket Cross
Malleable Iron Pipe Clamps
|
Malleable Iron Pipe Clamps Type 119 Two Socket Cross 90° joint, often used between middle rail and uprights on level sites and often paired with type 101 or 104. The through tube (vertical) cannot be joined within the fitting. |
||
|
Body Material Standard |
Malleable Iron, meet standard ASTM A197 |
|
|
Screw |
Stainless and Carbon Steel |
|
|
Tensile Strength |
>=350Mpa |
|
|
Elongation |
>=10% |
|
|
Hardness |
HB<=150 |
|
|
Size Available |
AA to E (OD size 27-60 MM) |
|
|
Surface Treatment |
Hot Dipped Galvanized, Black, Zinc Plated & Powder Coated |
|
|
Pipe Clamp Size |
Nominal Bore |
Outside Diameter |
|
AA21 |
1/2’’ |
|
Send product request
Other supplier products
| Malleable Iron Beam Clamps | Malleable Iron Beam Clamps Malleable Iron Beam Clamps Malleable Iron BeamClamps Standard Materials Malleable Iron,ductile i... | |
| Tees Female Malleable Iron Pipe Fittings | Tees Female Malleable Iron Pipe Fittings Malleable Iron Pipe Fittings Malleable Iron Pipe Fittings FIG NO. 130R TeesFemale 90°Reducing Material... | |
| Malleable Iron Plugs | Malleable Iron Plugs Malleable Iron Pipe Fittings Malleable Iron Pipe Fittings Factory Malleable Iron Pipe Fittings FIG NO. 290Plugs ... | |
| Malleable Iron Three Way Elbow | Malleable Iron Three Way Elbow Malleable Iron Pipe Clamps Malleable Iron Pipe Clamps Type 116 Three ways through 90° corner joint, ... | |
| Hose Nipples | Hose Nipples Carbon Steel Pipe Nipples Product:hose nipples or hose menderFeatures: 1)Material:ERW steel pipes Hose Nipplesor seamless steel pip... |
Same products
| UHMWPE pipe for mining in Australia | Seller: Shandong Yanggu Dragon New Material Co Ltd | UHMWPE pipe for mining in Australia Discover the Ultimate Solution: Are you ready to eleva... | |
| 20543RW Interlock One Piece Fittings | Seller: Hebei Zhongke Huatai Fluid Technology Co., Ltd | 20543RWInterlock One Piece Fittings Product Introduction H20543RW HT H... | |
| 20411RW One Piece Fittings | Seller: Hebei Zhongke Huatai Fluid Technology Co., Ltd | HT HydraulicsSince 1987 Hydraulic Hose Fitting -One Piece Fittings Metric Female 24° Cone O-... | |
| 26713RW Interlock One Piece Hose Fittings | Seller: Hebei Zhongke Huatai Fluid Technology Co., Ltd | HT Hydraulics Since 1987 Hydraulic Hose Fitting-Interlock One Piece Fittings JIC FEMALE 74° ... | |
| Cup Nut Pipe Loop | Seller: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Size: 1”~8”Material: Carbon SteelDimension: UL 203, MSS SP-58/69 (Type-7)Surface: Pre... |










