.

Molybdenum Electrode

Molybdenum electrodemade by powder metallurgy technology with pure molybdenum powder has high melting point, high temperature strength and hardness, good thermal shock resistance, good electrical conductivity, thermal conductivity and corrosion resistance. Molybdenum also has a good process suitablility, easy to carry out pressure processing and mechanical processing. Molybdenum is resistant to high temperature, corrosion of molten glass, and the corrosion products do not pollute the glass, so it has been widely used in the glass melting furnace.

Molybdenum Electrode Types

MoZrO2 Electrode

The electrode may deform due to gravity and glass liquid erosion at high temperature. We can provide a special electrode enhanced scheme for this case. A small amount of ZrO2 adding to the molybdenum can greatly enhance the electrode sag resistance and creep resistance at high temperature.

Coated Electrode

A special kind of silicon material is coated on the surface of the molybdenum electrode, which can cut off the contact between the air and the electrode, thereby increasing the service life of the electrode in the oxidizing atmosphere.

Molybdenum Electrode Specification

The molybdenum electrode is suitable for all kinds of glass furnace except lead glass, and the highest temperature is 1600℃. We have molybdenum electrode water jacket, 5K alloy, impeller and other accessories for your choice.

Main specifications and performance indexes of molybdenum electrodes

Electrode type

Specification(mm)

Electrode strength(σb MPa)

20℃

1400℃

Molybdenum plate electrode

(3-10) × (80-250) ×

676

66

Molybdenum rod electrode

(Φ30-Φ80) × (200-1500)

696

83

Molybdenum Electrode Application

Glass furnaces are divided into flame heating furnaces and electric melting furnaces. Electric melting furnaces are mainly divided into all electric-melting furnaces, forehearth electric boosters and complex furnaces. With the further improvement of the national energy saving and environmental protection requirements, the electric melting furnace has began to replace the flame heating furnace.

Domestically, there are two major systems as follow for the molybdenum electrode electric melting furnace according to the categories of molten glassware: soda-lime glass and borosilicate glass. Various specifications of the plate and rod electrode can meet the requirements for various electric melting furnace. The electrode has the advantages of less investment, high energy saving and high yield, corrosion resistance of the glass liquid, uniform electric load and current density, uniform temperature in the furnace, stable operation, etc.



Send product request

To: Baoji City Changsheng Titanium Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Gr5 Titanium Tube
Gr5 Titanium Tube The 21st century is an era of sustainable development of the marine economy, and marine resources are an important sector of economic development. ...
Titanium Anode & Electrode
Titanium Anode & Electrode The procedure entails brushing, sintering, and electroplating. The coating's components and quantities vary depending on the purpose. It is typical...
Molybdenum Wire
Molybdenum Wire Molybdenum wireis mainly refers to the wire cutting processing with high pressure electric field continuous movement to cut the workpiece made of m...
Molybdenum Sputtering Target
Molybdenum Sputtering Target Molybdenum sputtering targets include molybdenum plane targets (molybdenum round targets and molybdenum strip-type targets) and molybdenum rotating...
Titanium Capillary Tube
Titanium Capillary Tube Normally titanium tubes with an outside diameter of less than 3mm as capillaries. The main raw materials are gr1, gr2, gr5, and gr5 Eli. With the d...
All supplier products

Same products

Molybdenum Electrode
Molybdenum Electrode Seller: Baoji City Changsheng Titanium Co.,Ltd Molybdenum electrodemade by powder metallurgy technology with pure molybdenum powder has high mel...
PTFE Braided Packing
PTFE Braided Packing Seller: Jiangsu Xinrui Plastic Technology Co.,Ltd PTFE braided packingis a new type of sealing packing with desperse Teflon tape or tensile belt af...
Molybdenum Boat
Molybdenum Boat Seller: Longhua Technology Group (Luoyang) Co., Ltd Molybdenum boats are small, boat-shaped containers made of pure molybdenum or molybdenum alloys, ...
Centrifuge Tube
Centrifuge Tube Seller: Hunan Xiang Yi Laboratory Instrument Development Co., Ltd. laboratory centrifuge tubeby Cence is a laboratory equipment used to separate substances of diffe...
Medical Injection Molding
Medical Injection Molding Seller: Taizhou Huangyan Fow Mould CO., LTD Keyplast has efficient team with many years' experience of injection moulding, while medical indu...