Ring / Cylinder Forging Component
Ring forgings are ring-shaped objects in which external force is applied against the metal blank and transform it by plastic deformation. This force is typically achieved through the use of hammer or pressure. The forging process creates a fine grain structure and improves the physical properties of the metal. Ring forgings can be seen everywhere in daily life.
Cylindrical parts are an important type in the custom forgings and are important component of products such as pressure vessels and cracking reactors. The forged steel round bar can be produced according to the drawings and requirements provided by the customer. The surface of the forgings is clean and has small machining allowance.
Ring / Cylinder ForgingsMain parameters
Ring：Outside diameter≤Φ850mm Cylinder：Outside diameter≤Φ850mm
Ring / Cylinder Forgings Common Technical Standards
Ring: NB/T47008~47010
Cylinder: GB/T3077 EN10083 EN10085 JB/T6395
Ring / Cylinder Forgings Typical Steel Grades
Ring: #20, #35, 16Mn, 15CrMo, 1.25Cr-0.5Mo, 2.25Cr-1Mo, 2.25Cr-1Mo-0.3V, 12Cr2Mo1V, 21CrMo10, 0-1Cr8Ni9(Ti), 1Cr17Ni2, 304(L), 316L(N), 321, 347, 00Cr19Ni13Mo3, 00Cr22Ni5Mo3N
Cylinder: 18CrNiMo7-6, 17CrNiMo6, 20CrNiMo, 20CrNi2Mo, 20CrMnMo, 20CrMnTi, 34CrNiMo6, 30CrNiMo8, 40CrNiMo, 35CrMo, 42CrMo
Ring / Cylinder Forgings Applications
Like our disk forging products, the ring/cylinder forgings can be used for gears, wheels, etc. for port machinery and marine machinery. Pressure vessel forgings for chemical machinery
As a professional die steel manufacturers, Hongsheng has high-quality hot work steelfor sale. Welcome to contact us if needed.
Send product request
Other supplier products
 |
Step Shaft Forging Component | Forged stepshaftis a shaft with multiple cylinders of different diameters connected together like steps. In fact, the outer ring and plane turning ... |
 |
Ring / Cylinder Forging Component | As one of responsible die steel suppliers, Hongsheng Group has been focusing on the development and production of special steel castings, forged ba... |
 |
HS 2343ESR-S Hot Work Die Steel | As large-size (thickness range 400-750mm) and high-polished plastic mold steel, HS 2343ESR-S, as a 1.2343 steel equivalentmaterial, has higher puri... |
 |
HS S350 Hot Work Die Steel | HS S350 steelis improved Cr-Mo-V hot work die steel. The special composition design makes it have high high-temperature strength and thermal fatigu... |
 |
DIE STEEL (MOULD STEEL) | Die steel products are used to make molds of cold punching, hot open forgingand die casting, etc. It is the main processing tool for producing part... |
Same products
 |
Steel Searcher Steel Product & Hardware | Seller: STEEL SEARCHER HONG KONG LIMITED | Steel Searcher is a professional steel hardwareproduct company that provides comprehensive steel ... |
 |
Frac PU Layflat Hose | Seller: SUZHOU SEAPEAK CO.,LTD | The outer cover of our PU layflat hose has been produced with extra thickness for tough environme... |
 |
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can impro... |
 |
SDS Micro Copper Coated Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Micro brass fibers are made of copper coated steel wire , which is the most important materials o... |
 |
SDS Loose Hooked End Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure tha... |
