Ring / Cylinder Forging Component
Ring forgings are ring-shaped objects in which external force is applied against the metal blank and transform it by plastic deformation. This force is typically achieved through the use of hammer or pressure. The forging process creates a fine grain structure and improves the physical properties of the metal. Ring forgings can be seen everywhere in daily life.
Cylindrical parts are an important type in the custom forgings and are important component of products such as pressure vessels and cracking reactors. The forged steel round bar can be produced according to the drawings and requirements provided by the customer. The surface of the forgings is clean and has small machining allowance.
Ring / Cylinder ForgingsMain parameters
Ring：Outside diameter≤Φ850mm Cylinder：Outside diameter≤Φ850mm
Ring / Cylinder Forgings Common Technical Standards
Ring: NB/T47008~47010
Cylinder: GB/T3077 EN10083 EN10085 JB/T6395
Ring / Cylinder Forgings Typical Steel Grades
Ring: #20, #35, 16Mn, 15CrMo, 1.25Cr-0.5Mo, 2.25Cr-1Mo, 2.25Cr-1Mo-0.3V, 12Cr2Mo1V, 21CrMo10, 0-1Cr8Ni9(Ti), 1Cr17Ni2, 304(L), 316L(N), 321, 347, 00Cr19Ni13Mo3, 00Cr22Ni5Mo3N
Cylinder: 18CrNiMo7-6, 17CrNiMo6, 20CrNiMo, 20CrNi2Mo, 20CrMnMo, 20CrMnTi, 34CrNiMo6, 30CrNiMo8, 40CrNiMo, 35CrMo, 42CrMo
Ring / Cylinder Forgings Applications
Like our disk forging products, the ring/cylinder forgings can be used for gears, wheels, etc. for port machinery and marine machinery. Pressure vessel forgings for chemical machinery
As a professional die steel manufacturers, Hongsheng has high-quality hot work steelfor sale. Welcome to contact us if needed.
在线联系供应商
Other supplier products
 |
4Cr5MoSiV Steel | 4Cr5MoSiV is air-quenching hardening hot work die steel, which is H11 steel imported from the United States. Its performance and service life are h... |
 |
DIE STEEL (MOULD STEEL) | Die steel products are used to make molds of cold punching, hot open forgingand die casting, etc. It is the main processing tool for producing part... |
 |
Disk / Flange Forging Component | Disk / Flange Forging Component The basic process used for disk forgingis upsetting, and then chamfering, rounding, and leveling as the subseque... |
 |
HS S350 Hot Work Die Steel | HS S350 Hot Work Die Steel HS S350 steelis improved Cr-Mo-V hot work die steel. The special composition design makes it have high high-temperatu... |
 |
HS 2344 Hot Work Die Steel | HS 2344 using 1.2344 steelis pressure-resistant hot-working die steel. The performance and use of HS material 2344are basically the same as that of... |
Same products
 |
Hot Rolled Galvanized Sheet | 卖方: North China Steel (Shandong) Co., Ltd. | Hot Rolled Galvanized Sheet Description Specifications & Technology:CustomizeGalvanized St... |
 |
Galvanized Seamless Pipe | 卖方: North China Steel (Shandong) Co., Ltd. | Galvanized Seamless Pipe Description Specifications & Technology:Customizeseamless steel p... |
 |
Galvanized Longitudinal Welded Pipe | 卖方: North China Steel (Shandong) Co., Ltd. | Galvanized Longitudinal Welded Pipe Description Specification & Technology:Customizewholesal... |
 |
Electro-Galvanized Steel Pipe | 卖方: North China Steel (Shandong) Co., Ltd. | Electro-Galvanized Steel Pipe Description Specifications & Technology: Customizewholesale ga... |
 |
Hot Rolled Galvanized Steel Coil | 卖方: North China Steel (Shandong) Co., Ltd. | Hot Rolled Galvanized Steel Coil Description Specifications & Technology: Customize accordin... |
