Weather Proof Double Layer Epoxy Compound Powder
Introduction
The product is a kind of weather proof double layer heavy duty epoxy compound powder, comprises of two layers of primer and finishing, to be applied directly to steel surface after sandblasted and heated. The primer layer is to provide protection for anticorrosion. The finishing layer is anti- scratch, anti-impact, anti-abrasion as the common advantage of epoxy coating, it is also featured with high shinning, UV-resistant, and superior durable, heat resistant, anti-corrosion, anti-powderization. The finishing layer is applied onto the primer layer. Two layers of powder are melted and solidified to an even, dense coating layer with solid jointing between two layers. The powder can be customized to a plenty of color with can’t be get from normal anti-corrosion layer. the coating will not fade, darken fast over time, even for the bright colors like white, light blue, pink, bright yellow, etc.
The coating is mainly used for anti-corrosion protection of oil and gas, municipal piping line, etc.
Feature
Excellent UV resistant and weather proof performance.
No need to apply primer painting before applying the coating.
Easy application, fast solidification, high working efficiency, suitable for working on coating line.
Coating has superior flexibility, toughness and anti bending performance. Easy for quality inspection.
Application Requirements
Powder to be applied to surface by high pressure electrostatic spraying.
Powder spray thickness: Primer layer (EPY2-VD) ≥ 300 μ m, finishing layer: (PPY2-VM)≥300μm, total thickness ≥600μm.
Average quantity: Primer layer (EPY2-VD)420g/m2, finishing layer: (PPY2-VM)420 g/m2.
Surface treatment: stand blasting or grit blasting.
Solidification condition: Primer layer (EPY2-VD)：（190～220）℃（/2~4）min, finishing layer: (PPY2-VM)：（190～220）℃/（2~3）min.
Solidification instruction: the powder shall be applied to pre-heated workpiece, solidified by remaining heat, reheating is normally not required unless wall thickness is too less or working temperature is too low.
Application Procedures:
Send product request
Other supplier products
 |
Spiral Steel Pipe Supplier | Spiral steel pipe is a strip steel as raw material, extrusion forming at normal temperature, automatic double wire double-sided submerged arc wel... |
 |
polyethylene coated steel pipe | 3PE coating is based on Fusion Bonded Epoxy (FBE) as the bottom, the adhesive for the middle layer and extruded polyethylene for the outer shea... |
|
|
3LPE coated steel pipe | 3PE coating is based on Fusion Bonded Epoxy (FBE) as the bottom, the adhesive for the middle layer and extruded polyethylene for the outer sh... |
|
|
3LPE coated steel pipe | 3PE coating is based on Fusion Bonded Epoxy (FBE) as the bottom, the adhesive for the middle layer and extruded polyethylene for the outer ... |
|
|
plastic-coated steel pipe | Inside and outside epoxy to maximize the advantages of both steel pipe and plastic pipe. Not only have the mechanical properties of steel, hi... |
Same products
 |
Press Ball Valve | Seller: Zhejiang Carbo Bronze Co., LTD | The main features of the press ball valve are its compact structure, reliable sealing, simple str... |
 |
Steel Wire | Seller: CUMIC STEEL LIMITED | OVERVIEW OFSTEEL WIRE Steel wire chinafor sale are types of a beneficial and versatile materials... |
 |
Steel Strapping | Seller: CUMIC STEEL LIMITED | OVERVIEW OFSTEEL STRAPPING The steel strap is a kind of narrow and long steel sheet. Steel strap... |
 |
Steel Square Bar | Seller: CUMIC STEEL LIMITED | China square bars refer to a type of cold rolled square barthat find uses in various uses when th... |
 |
Steel Sheets | Seller: CUMIC STEEL LIMITED | Carbon steel sheets for salerefer to a type of steel that is made into thin, flat pieces by an in... |
