Wear Resistant and Corrosion Resistant Casting Alloy Tube
Our company website:
Designation: A743/A743M-13a Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application A451ASTM A451-06 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperatu A487 Standard Specification for Steel Castings Suitable for Pressure Service A351 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts A352 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service A703 Standard specification for steel casting,General requirements,for pressure-containing parts Features: 1. High abrasion resistance 2. Corrosion resistance 3. Tear resistance 4. Hardness: Applications: 1. Roller screen rolls for theiron ore pelletizing industry 2. Subsequent pellet processing operation in the steel industry
|
Results of materials testing |
|||||||||
|
Chemical Analysis (%) |
|||||||||
|
Pipe No. |
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
|
|
CA6NM |
≤0.06 |
≤1.00 |
≤1.00 |
≤0.04 |
≤0.03 |
||||
|
ZG06Cr13Ni4Mo |
≤0.06 |
≤0.80 |
≤1.00 |
≤0.035 |
≤0.025 |
||||
|
Mechanical Properties |
||||||
|
Pipe No. |
Heat No. |
Tensile Strength MPa |
Yield Strength MPa |
Elongation After Fracture % |
Reduction of Area % |
Hardness (HB) |
|
CA6NM |
285HB +-25 |
|||||
CA6NM stainless steel pipe not only has good corrosion resistance, weldability, but also has high strength and low temperature toughness .CA6NMbelongs to low carbon martensite stainless steel, mainly used for hydropower facilities and minefacilities of the wear parts. Such as turbine blades, turbine, roller screen/feeder. Not onlyto undergo general corrosion medium, but alsoto endure the erosion of the sediment, cavitation erosionat runtime. Poor use conditions.
CA6NM stainless steel pipe
Compare CA6NM and 17-4 ph. CA6NM stainless steel pipehas higher strength, hardness, resistance to cavitation erosion, also keep good toughness and fatigue resistance, underwater and has better weldability
Not only CA6NM stainless steel has good corrosion resistance, weldability, but also has high strength and low temperature toughness.
The casting of CA6NMstainless steel has many advantages inapplication Its advantages are as follows： 1.High strength and high toughness Rp0.2 > 600 MPa Rm > 800MPa A > 18% Z > 50% A kv > 100 j. 2 Good low temperature impact properties, fracture toughness and FATT (Brittle transition temperatureof -173 ~ -196 ℃). 3 Good welding yao casting and machining performance. 4 Good underwater fatigue resistance and cavitation erosion and wear resistance. 5 High harden ability and good mechanical properties, with heavy section. 6 CA6NMstainless steel castings good engineering nondestructive testing performance.
But CA6NMstainless steel has its prominent shortcomings and engineering practice. Must solve the key technical problems of its shortcomings as follows,
- 2.Heat treatment process control and the sensitivity of the mechanical properties change.
Through the optimization process. We produce CA6NMtube, meetingwith ASTM A743 and Astm487, and exported to Quebec, Canada.The microstructure of 100% martensite.
Send product request
Other supplier products
 |
Grease Roll | Our company website: Roll blank is cast by imported centrifugal compound casting equipment. High Ni Cr Mo alloy is adopted, the thickness of the ... |
 |
CA6NM ASTM A743 A743M | Our company website: CA6NM ASTM A743 A743M CA6NM A743 A743M A487 Grade（UNS）：CA6NM (J91540) Type：12 Chromium,4 Nickel CA6NM Chemical Requirements:... |
 |
CA6NM stainless steel pipe | Our company website: Compare CA6NM and 17-4 ph. CA6NM stainless steel pipehas higher strength, hardness, resistance to cavitation erosion, also k... |
 |
Duplex stainless steel | Our company website: Duplex stainless steel (DSS for short) refers to stainless steel with ferrite and austenite accounting for about 50% resp... |
|
|
Wear Resistant and Corrosion Resistant Casting Alloy Tube | Our company website: Designation: A743/A743M-13a Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, f... |
Same products
 |
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
Pup Joint 2-7/8"NUE N80 2FT Blast Joint | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
NC50 PIN 4145H XT39 BOX Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
 |
API 5CT 2-7/8"NUE N80 Tubing Coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | API 5CT 2-7/8"NUE N80 Tubing Coupling Introduction NUE Thread Couplings are short lengths of pi... |
