hydraulic hoses protection fire resistant sleeve

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

500°F/260°C Continuous Exposure: Higher Intermittent
AS1072 Gradehydraulic hoses protection fire resistant sleeve

Aerostyle Fire Sleevewas specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.

Aerostyle Fire Sleevecan withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).

Sheds splash immediately
Aerospace AS1072 Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.

Withstands intense radiant heat and flame
Aerospace AS1072 Grade hydraulic hoses protection fire resistant sleevewill withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.

Aerostyle Fire Sleeveis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.

Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.

Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd

Other supplier products

	Removable heater insulation material	1000°F / 537°C Continuous Exposure: Higher Intermittent Removable heater insulation material We make different heat shield, like turbo heat...
	e-glass fiber insulation high temperature felt mat	e-glass fiber insulation high temperature felt matis a mechanically bonded glass fiber insulation blanket of uniform density supplied in thicknesse...
	Woven Silica Fabric	Woven Silica Fabricis suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), woven si...
	HEAT SHIELD SLEEVE BLANKET	1000°F / 537°C Continuous Exposure: Higher Intermittent HEAT SHIELD SLEEVE BLANKET Aluminum Coated Fiberglass Reflect Sleeveis made by brai...
	Aluminum Heat Shield Tape	Aluminum Heat Shield Tapewrapping is a fiberglass composite tape with a strong adhesive that wraps around your wires and hoses to protect from blaz...

Same products

	Phenolic Duct Board for Commercial Buildings	Seller: Langfang Clear Chemical Building Materials Co., Ltd	Phenolic duct boardis a high-performance insulation material made from phenolic foam with reinfor...
	Low Smoke Phenolic Foam Board	Seller: Langfang Clear Chemical Building Materials Co., Ltd	In today' s world, building safety is at the forefront of architecture and construction. As more ...
	Phenolic Sandwich Panel for Cold Storage Rooms	Seller: Langfang Clear Chemical Building Materials Co., Ltd	When it comes to designing or upgrading your cold storage facility, the choice of insulation mate...
	Phenolic Board for Roof Insulation	Seller: Langfang Clear Chemical Building Materials Co., Ltd	Phenolic Board for Roof Insulationis a high-performance rigid insulation material made from pheno...
	Anti-Mold Phenolic Board	Seller: Langfang Clear Chemical Building Materials Co., Ltd	Anti-Mold Phenolic Board, a next-generation insulation solution designed specifically for homes, ...