hydraulic hoses protection fire resistant sleeve
500°F/260°C Continuous Exposure: Higher Intermittent
AS1072 Gradehydraulic hoses protection fire resistant sleeve
Aerostyle Fire Sleevewas specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
Aerostyle Fire Sleevecan withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Sheds splash immediately
Aerospace AS1072 Grade Fire Sleeve withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Withstands intense radiant heat and flame
Aerospace AS1072 Grade hydraulic hoses protection fire resistant sleevewill withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.
Aerostyle Fire Sleeveis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.
Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
See all BSTFLEX fire sleeve here
Fire Sleeve With Metal Snap Closure
在线联系供应商
Other supplier products
 |
Automotive Heat Shield Insulation | Automotive Heat Barrier Insulationis designed to provide the best possible heat protection in areas where high temperatures are always present and ... |
 |
电缆防火套管 | 电缆防火套管由高品质无碱玻璃纤维纱编织成管后，涂以有机耐高温硅树脂经高温处理而成。耐高温套管具有阻燃、隔热、保温、抗电、柔软等性能。耐高温套管主要应用于钢铁厂、冶炼厂、玻璃厂、消防设备、大型变压场所等高温场所的电缆绝缘保护。 电缆防火套管广泛应用于电力、化工、冶金、船舶、机械制造及其它行业的高... |
 |
titanium Exhaust Header Wrap | 1200°F / 648°C Continuous Exposure: Higher Intermittent titanium Header Exhaust Wrap Kits titanium Heat Pipe Ceramic Fiber Insulationis mad... |
 |
High Temp Fiberglass Sleeve | 1000°F / 520°C Continuous Exposure: Higher Intermittent High Temperature Fiberglass Sleeve This Braided Fiberglass Sleevewill conform to ... |
 |
titanium Exhaust Header Wrap | 1200°F / 648°C Continuous Exposure: Higher Intermittent titanium Thermo Bandage Exhaust Heat Wrap Turbo titanium Thermo Bandage Exhaust Hea... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | 卖方: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | 卖方: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | 卖方: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | 卖方: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
