Copper Nickel Lead ZincRefractory Purging Plug Al Refining Furnace Slide Plate
The purging plug designed for aluminum refining has superior chemical stability, it would not react with molten aluminum or aluminum alloy. The pore position of purging plug is homogeneous and designed to generate stable tiny bubbles. The products have been successfully applied in Luoyang Wanji Aluminum Industry and Liaoning Yinyuan Aluminum Alloy company, and they are well approved. The purging plug for Copper Anode Furnace gives good current condition for heat transfer inside the furnace through solutions like soakage and permeability and improves the heat utilization efficiency, metal collection and slag removal. The application of purging plug has great significance on reducing tap to tap time and increasing production output. Made from high-purity, high-density, high-strength corundum based materials and matrix-adjusted system (MAS), purging plugs uses the unique radiated through-slots structure, show the features of stable structure, high and adjustable gas-flow, high purging rate, good corrosion/erosion resistance and long service life etc.The application advantages of slide gate plate in non-ferrous metallurgy are the following: it would provide more safety to operators; casting system could be controlled precisely and casting speed would be stable; it would reduce splashing during casting; it would reduce casting time by continuous casting and oxidation could also be reduced; it could stop casting in case of emergency.
Other supplier products
|
|
Three Casting Block Shroud Mono Block Stopper Submerged Entry Nozzle Tundish Refractories |
Ladle shroud is the refractory to connect ladle to tundish. It stabilizes steel stream and protect the steel from oxidation and splashing. The seri... |
|
|
Refractory Mortar Nozzle Filling Sand Gunning Mixes Ramming Mixes MgO-based Ramming Mix Shotcreting Mass Castables Self flow Castables for Ladle Refractories LF Steel Making Industry |
The SG series of mortars are classified as chrome-corundum, high-alumina, alumina-magnesia, magnesia based and carbon-containing type. The series o... |
|
|
Blast furnace BF Refractory Tap Hole Clay Waterless Taphole Clay |
Tap hole mass is used in the Blast furnace nozzle during the smelting process to prevent the molten metal from entering the nozzle.The exposed surf... |
|
|
EAF/Electric Arc Furance Refractory Graphite Electrode UHP HP EAF |
Graphite electrode is made of high-quality low ash materials,such as petroleum coke,needle coke and coal pitch.After calcining,burdening,kneading,f... |
|
|
EAF Gunning Repair Mixes Dry Ramming MixesTap Hole Filling mass |
High adhesive strength, Low rebound rate, Good sinter ability, Good erosion and corrosion resistance. High strength at low temperature, High hot st... |
All supplier products
Same products
