High quality Corundum Brick for glass furnace
Corundum refractory bricks are refractory products with alumina content greater than 90% and corundum as the main crystal phase. High normal temperature compressive strength (up to 340MPa). High load softening start temperature (greater than 1700 ° C). Very good chemical stability, strong resistance to acidic or alkaline slag, metals and glass liquids. Thermal shock stability is related to its organizational structure. Corundum bricks can be divided into sintered corundum brick and fused corundum brick. Sintered alumina and fused corundum can be used as raw materials, or alumina clinker with high Al2O3 / SiO2 ratio can be combined with sintered alumina and made by sintering. It can also be made of non-burning corundum brick with phosphoric acid or other binders. Mainly used in iron-making blast furnace and blast furnace hot air furnace, steel-making furnace refining furnace, sliding water heater, glass melting furnace and petrochemical industry furnace.As a professinal corundum refractory materials manufacturer, we have exported different corundum refractory bricks to more than 30 countires.Please kindly read the following and makeInquiry.Scope of application:
lCorundum brick is widely used in the lining of various high-temperature kilns in glass furnaces, conversion furnaces, metallurgical industries, etc.
Advantage:
lHigh normal temperature compressive strength
lHigh load softening start temperature
lGood chemical stability
lStrong resistance to acidic or alkaline slag, metals and glass liquids
Technical Data:
Items |
Ultra Purity Corundumbrick |
99 Corundumbrick |
90 Corundumbrick |
CorundumMullite Brick |
Al2O3 % |
≥99.3 |
≥98.5 |
≥90 |
≥80 |
SiO2 % |
≤0.15 |
≤0.3 |
≤8.5 |
≤18.5 |
Fe2O3% |
≤0.1 |
≤0.2 |
≤0.2 |
≤0.3 |
Bulk density g/cm3 |
≥3.25 |
≥3.25 |
≥3.1 |
≥2.9 |
Apparent porosity % |
≤18 |
≤18 |
≤18 |
≤18 |
Cold crushing strengthMPa |
≥100 |
≥100 |
≥100 |
≥100 |
Refractorinessunder load (0.2Mpa,0.6%) |
≥1700 |
≥1700 |
≥1700 |
≥1700 |
Reheating linear change rate (1600℃X 8h) |
-0.2 |
-0.2 |
||
Thermalexpansion % |
Send product request
Other supplier products
High quality Corundum Brick for glass furnace | Corundum refractory bricks are refractory products with alumina content greater than 90% and corundum as the main crystal phase. High normal temper... | |
High quality insulation brick for glass furnace | Insulationrefractory bricks refer to refractory materials with high porosity, low bulk density and low thermal conductivity. Thermal Insulation ref... | |
High quality Magnesia Carbon Brick for glass furnace | Magnesia-carbon bricks are made of high-melting alkaline oxide-magnesium oxide (melting point 2800℃) and high-melting carbon materials that are dif... | |
High quality alumina bubble brick for glass furnace | Alumina bubble bricks are made of alumina bubble balls and alumina powder as the main raw materials, combined with other binders, and fired at a hi... | |
High quality mullite brick for glass furnace | Mullite bricks are high-alumina refractories with mullite (3Al2O3·2SiO2) as the main crystal phase. Generally, the alumina content is betwee... |
Same products
ETH Ethereum Jasminer X4 BRICK ASIC Miner | Seller: Shenzhen Dovina Electronic Co.,Ltd | Jasminer x4 brick for sale from Jasminer mining EtHash algorithm with a maximum hashrate of 65Mh/... | |
ETH Ethereum Jasminer X4-1U ASIC Miner | Seller: Shenzhen Dovina Electronic Co.,Ltd | Model ASIC Jasminer X4-1U from Jasminer mining EtHash algorithm with a maximum hashrate of 520Mh/... | |
ASIC Miner and Parts | Seller: Shenzhen Dovina Electronic Co.,Ltd | Get the best ASIC miner for sale from Dovina Miner! Our high-quality mining ASIC machine ensures ... | |
High quality Corundum Brick for glass furnace | Seller: 788366 | Corundum refractory bricks are refractory products with alumina content greater than 90% and coru... | |
High quality High Aluminum Brick for glass furnace | Seller: 788366 | High alumina bricks are aluminum silicate neutral refractory materials with aluminum oxide (Al2O3... |