Converter refractories BOF refractory Slag Limiting Ball Slag Arrester
During the tapping process of the Converter, the molten steel level will decrease gradually. When it reaches a critical value, swirls will emerge in the upper area of tapping hole, which can easily draw the slag into the ladle. When the slag limiting ball is put into swirls, the ball will float in the upper area of tapping hole, thus the slag can be prevented from flowing into the ladle. The molten liquid steel will flow out from the gap between the limiting balls and tapping hole, so as to decrease total flowing slag amount.
Other supplier products
|
High Nickel Chrome Alloy Refractory Water Free Taphole Clay |
The tap-hole clay are made of bauxite , fused corundum, SiC, mullite, coke ,micro-powder , manufactured under constant temperature mixing technolog... |
|
Metallurgy Refractory Reheating Furnaces Chrome corundum Zirconcorundum Skid Rail mortar Castables |
Our products have the following advantages: Low pressure loss Wide specific area, Fast heat-transfer speed and Excellent thermal shock resistance L... |
|
EAF Tap Hole Blocks EBT block Gunning mix Steel Making |
Good oxidization resistance,High strength,Excellent erosion resistance,Long life,Easy installation. |
|
EAF Ladle Converter MgO C Brick Magnesia carbon brick AMC brick |
Full range of resin bonded mag-carbon brick. The brick contain sintered or fused grain magnesia of varying purity, carbon in the range of 10 to 18%... |
|
Three Casting Block Shroud Mono Block Stopper Submerged Entry Nozzle Tundish Refractories |
Ladle shroud is the refractory to connect ladle to tundish. It stabilizes steel stream and protect the steel from oxidation and splashing. The seri... |
All supplier products
Same products