Tempered glass Toughened glass Safety glass processed glass Polished
PRODUCTION PROCESS:
In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing "lehr"; and then annealed glass is heated to a temperature near its softening point and forced to cool rapidly under carefully controlled conditions. The heat treating process produces highly desirable conditions of induced stress, which result in additional strength, resistance to thermal stress, and impact resistance.
FEATURE:
1. Safety, once broken, it splits into tiny harmless pieces.
2. Hardness, 4 times harder than ordinary float glass.
3. Special logo and pattern can be printed on tempered glass.
4. Outstanding performance in resisting thermal stress and wind-load.
5. Bear sudden temperature change of 220 centigrade degree.
SPECIFICATIONS:
Thickness: 3——19mm
Sizes: Max. size: 2440x5000mm
APPLICATION:
1. Traffic vehicles, such as the windows of train, bus, car etc
2. Architecture, such as windows or other areas in a building
3. Household appliances and furniture, such as glass table top and show shelves.
NOTICE:
1. Tempered glass can not be cut, drilled or other further process.PRODUCTION PROCESS:
In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing "lehr"; and then annealed glass is heated to a temperature near its softening point and forced to cool rapidly under carefully controlled conditions. The heat treating process produces highly desirable conditions of induced stress, which result in additional strength, resistance to thermal stress, and impact resistance.
FEATURE:
1. Safety, once broken, it splits into tiny harmless pieces.
2. Hardness, 4 times harder than ordinary float glass.
3. Special logo and pattern can be printed on tempered glass.
4. Outstanding performance in resisting thermal stress and wind-load.
5. Bear sudden temperature change of 220 centigrade degree.
SPECIFICATIONS:
Thickness: 3—19mm
Sizes: Max. size: 2440x5000mm
APPLICATION:
1. Traffic vehicles, such as the windows of train, bus, car etc
2. Architecture, such as windows or other areas in a building
3. Household appliances and furniture, such as glass table top and show shelves.
NOTICE:
1. Tempered glass can not be cut, drilled or other further process.
Other supplier products
|
|
4 6 8mm Clear Nashiji Patterned Glass for window furniture door |
PRODUCTION PROCESS: Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, e... |
|
|
3-19mm Toughened glass/Safety glass building glass for window Furniture bathromm glass |
PRODUCTION PROCESS: In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This ann... |
|
|
3mm 4mm 8mm Patterned glass for door window Furniture |
PRODUCTION PROCESS: Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, e... |
|
|
4mm 6mm 10mm Bronze float glass color glass used for building Curtain wall |
PRODUCTION PROCESS: The same as in float glass production. The only variation is the colorants mixed at the beginning with the standard raw mater... |
|
|
4mm 5mm 8mm 10mm Tinted float glass color glass used for building Curtain wall |
PRODUCTION PROCESS: The same as in float glass production. The only variation is the colorants mixed at the beginning with the standard raw mater... |
All supplier products
Same products
