Tempered glass Toughened glass Safety glass processed glass Polished
PRODUCTION PROCESS:
In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing "lehr"; and then annealed glass is heated to a temperature near its softening point and forced to cool rapidly under carefully controlled conditions. The heat treating process produces highly desirable conditions of induced stress, which result in additional strength, resistance to thermal stress, and impact resistance.
FEATURE:
1. Safety, once broken, it splits into tiny harmless pieces.
2. Hardness, 4 times harder than ordinary float glass.
3. Special logo and pattern can be printed on tempered glass.
4. Outstanding performance in resisting thermal stress and wind-load.
5. Bear sudden temperature change of 220 centigrade degree.
SPECIFICATIONS:
Thickness: 3——19mm
Sizes: Max. size: 2440x5000mm
APPLICATION:
1. Traffic vehicles, such as the windows of train, bus, car etc
2. Architecture, such as windows or other areas in a building
3. Household appliances and furniture, such as glass table top and show shelves.
NOTICE:
1. Tempered glass can not be cut, drilled or other further process.PRODUCTION PROCESS:
In the production of flat glass, the molten silica-based mix is cooled slowly under carefully controlled conditions. This annealing procedure removes undesirable stresses from the glass. Cooling occurs in an annealing "lehr"; and then annealed glass is heated to a temperature near its softening point and forced to cool rapidly under carefully controlled conditions. The heat treating process produces highly desirable conditions of induced stress, which result in additional strength, resistance to thermal stress, and impact resistance.
FEATURE:
1. Safety, once broken, it splits into tiny harmless pieces.
2. Hardness, 4 times harder than ordinary float glass.
3. Special logo and pattern can be printed on tempered glass.
4. Outstanding performance in resisting thermal stress and wind-load.
5. Bear sudden temperature change of 220 centigrade degree.
SPECIFICATIONS:
Thickness: 3—19mm
Sizes: Max. size: 2440x5000mm
APPLICATION:
1. Traffic vehicles, such as the windows of train, bus, car etc
2. Architecture, such as windows or other areas in a building
3. Household appliances and furniture, such as glass table top and show shelves.
NOTICE:
1. Tempered glass can not be cut, drilled or other further process.
Other supplier products
|
|
4mm 5mm Dark grey Reflective float glass Coated glass Building glass |
PRODUCTION PROCESS: It is produced by using CVD technology (chemical vapor deposition) that creates a perfectly uniform layer of metal oxide chem... |
|
|
3 4 5 6 8mm Clear Mistlite Patterned Glass for window furniture door |
PRODUCTION PROCESS: Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, e... |
|
|
Tinted Acid Etched Glass Frosted Glass used for Shower screen doors wall railings |
PRODUCTION PROCESS: with the nitric acid etching one side or both sides of the glass to obtain concave-convex effect, it can also be tempered. ... |
|
|
3mm 4mm 8mm Patterned glass for door window Furniture |
PRODUCTION PROCESS: Using the high quality raw materials from both domestic and abroad, such as the silica sand, soda ash, salt cake, dolomite, e... |
|
|
3 4 5 6 8 10 12 mm Low iron float glass Ultra clear glass High transmittance glass |
Including low iron float glass and low iron patterned glass. LOW IRON FLOAT GLASS BRIEF INTRODUCTION: Low iron float glass is also called ultra cl... |
供应产品
Same products
