HF150 well drilling machine
HF150 well drilling machine
Specially recommended
This machine gained 3 national practical new-type patents invention.
1.This well driller is equipped with hexagonal vertical shaft and hexagonal drive drilling rod, with strong rigidity and big transfer torque.
2.Equipped with cone plate friction clutch, being facile to operate, with big transfer torque.
3.This well drilling machine Adopts rolling bearing type hoist and equipped with wide brake band and big lifting capacity.
4.Equipped with speed reducer and sludge pump, being integrated structure.
5.The entire machine is featured by strong adaptability, high motive power, low cost and broad compatibility.
6.Equipped with hydraulic control pressure feed mechanism for the purpose of improvement of construction efficiency.
7.Using hydraulic control well head displacement mechanism for enlargement of initial hole diameter.
Main machine technical parameter
Drilling depth 30--150m
Drlling diameter 300-75mm
Drilling pipe diameter 50mm
Drilling angle 90°-75°
Drilling weight（no include power） 910kg
Unity machine dimensions 2.75×0.95×1.6m
Spindle
Spindle speed 64.128.287.557r/min
Spindle stroke 450mm
Hoist
Max. single line hoisting capacity 1600kg
Reel lifting speed 17.35.75.151r/min
Reel diameter 140mm
Wirerope diameter 12.5mm
Wirerop cubic measure 35m
Hug floodgate diameter 254mm
Hug floodgate belt width 70mm
Distance between drill and hole 400mm
Mud pump
Type Horizontal single urn twin-action
Displacement 170L/min
Power
Diesel engine s1105 Model, 18HP
Electric Motor Y160M—4 ,15kw 1440r/min
Maximum pressure 1.5Mpa
Work pressure 0.7Mpa
Water inlet caliber 40mm
Water to exit caliber 30mm
Triangle conveyer belt B1728mm
Useful
Geology general check exploration, Earth physics exploration, sampling test in mining, water Well, Blast opening etc drilling engineering
Send product request
Other supplier products
 |
CR-20GFQ generator | CR-20GFQ unit Technical parameters: Main features of gas engine Engine Model CR4100Q Engine cylinder diameter×stroke 100×115 mm Eng... |
 |
18.5SCF Fixed screw compressor | 18.5SCF、22SCF、37SCF Fixed screw compressor technical parameter： Model 18.5SCF 22SCF 37SCF Volume Flow（m3/min） 3.0 3.6 6.0 Discharge Pressure 0.... |
 |
Digital generator | Features and benefits: 1、Low noise design, about 54~59dB/7m. 2、Lightweight delivers super portability. 3、6 hours running on a single fuel tank.... |
 |
BHC20A Crawler Crane | 1. Original Imported power system, hydraulic system and pilot control system ensure stable performance and sensitive operation. 2. Unique telesco... |
 |
SD16 bulldozer | SD16 Series bulldozers main parameters: ENGINE Model Shangchai C6121ZG70B STEYR WD10G175E15 Water cooled,in-line,4-stroke injection direct Rate... |
Same products
 |
AEMK 588 Loader | Seller: AEMK MACHINE CO.,LTD | Cab Height :2670mm Overall Dimensions ( L * W * H ):5700*2000*2670mm Front Wheel Counterweight ... |
 |
Quick Change Worktable | Seller: Nextas Co.,Ltd | Quick Change Worktable Zero Point Pneumatic Chuck Zero Point Positioning Datum System NE... |
 |
Self Centering Vise | Seller: Nextas Co.,Ltd | Self Centering Vise Key Advantages High precision: repeatability as tight as ≤ 0.005 mm ... |
 |
BDS Positioning Chuck | Seller: Nextas Co.,Ltd | BDS Positioning Chuck Self Centering Vise Self-centering vise is a type of workholding tool that... |
 |
Quick Change Pallet System | Seller: Nextas Co.,Ltd | Quick Change Pallet System Quick Change Pallet System Quick Change Pallet System delivers m... |
