Full-automatic GD-150 Rebar Upset Forging Machine, GZL-45 Rebar Thread Cutting Machine
Product Description
Model Full-automatic GD-150
Dia. of Upsetting Rebar 16-40mm
Oil Pressure Flux 10L/min
Max Pressure 320 Mpa
Voltage 380V 50Hz
Power 7.5kw
Net Weight 850kgs
Dimension 1225*580*1100mm
Model Full-automatic GZL-45
Dia. of Threading Rebar 16-40mm
Rotation Speed 32r/min
Reverse Rotation Speed 46r/min
Voltage 380V 50Hz
Power 3.0 kw
Oil Pump Power 2.2 kw
Net Weight 1000kgs
Dimension 1325*850*1070mm
Model Full-automatic GD-150
Dia. of Upsetting Rebar 16-40mm
Oil Pressure Flux 10L/min
Max Pressure 320 Mpa
Voltage 380V 50Hz
Power 7.5kw
Net Weight 850kgs
Dimension 1225*580*1100mm
Model Full-automatic GZL-45
Dia. of Threading Rebar 16-40mm
Rotation Speed 32r/min
Reverse Rotation Speed 46r/min
Voltage 380V 50Hz
Power 3.0 kw
Oil Pump Power 2.2 kw
Net Weight 1000kgs
Dimension 1325*850*1070mm
Product Feature
High tensile strength, stable quality, easy to operate, fast speed, wide application, good economic returns etc.
High tensile strength, stable quality, easy to operate, fast speed, wide application, good economic returns etc.
Product Specification/Models
GD-150, GZL-45
GD-150, GZL-45
Application
Use Rebar Upset Forging Machine to forge rebar end, and then use Thread Cutting Machine to cut thread on forged rebar end, finally connect threaded rebar and coupler.
Use Rebar Upset Forging Machine to forge rebar end, and then use Thread Cutting Machine to cut thread on forged rebar end, finally connect threaded rebar and coupler.
Payment
TT, LC
TT, LC
Delivery
within 3 days
within 3 days
Origin
Beijing, China
Beijing, China
Minimum Order
1 set
1 set
Packaging
plywood case
plywood case
Send product request
Other supplier products
 |
Concrete Truss Screed | Product DescriptionModel ZP-90Power 9HP/5.5kwWorking Width 8m-11mWorking Depth 260cmFrequency 70HZStandard Section 1000/2000mm Product FeatureHONDA... |
 |
AGS-40C Rebar Thread Rolling Machine | Product DescriptionPeel ribs and roll threads in one time loadingBe able to process rebar of grades II and III with diameter 16mm-40mm1.It is compa... |
 |
Road Cutter | Product DescriptionModel QG-500Engine HONDA GX390Power 13HPBlade Diameter ø500mmCutting Depth 170mmWater Tank 45LStarting Model HandPackage ... |
 |
Rebar coupler | Product DescriptionOcepo rebar splicer adopts #45 high quality carbon steelUsed to splice rebars of Grade II and III with diameter 16-40mmModel Spe... |
 |
AGW40 Rebar Bending Machine, AGW50 Rebar Bending Machine, | Model AGW50(A)Bending Diameter Plain round bar: 6-40mm 6-50mmribbed rebar:6-36mmSpecification of working disk 420mmSpindle speed could adjust to 5-... |
