ROLLING SHUTTER SLATS ROLL FORMING MACHINE
How to select Rolling Shutter Slats Roll Forming Machine
l In the selection of materials should consider more lightweight, durable materials, so that even in special circumstances can play a higher security.
l The purchase of rolling door motor is also an important part. Remember not to feel that the lifting force is enough, because the bearing capacity of the rolling door motor will gradually reduce the actual lifting effect with time, so try to select materials as much as possible. It must exceed the actual lifting force of the curtain.
l Observe whether the structure of the electric rolling door is precise, the degree of lubrication is good or bad, and the heat dissipation of the good electric rolling door is compared, the full gear is rotated, no chain, no belt, and thus the overall life of the rolling door movement is enhanced.
l Brand is also an indispensable factor. In order to reduce the production cost, many small processing plants simply reduce the material of the accessories.
There is no way to guarantee the quality of the installation, and the maintenance is also the same, so it's better to consider the brand of the company when purchasing the rolling shutter slats roll forming machine.
BOSJ Rolling Shutter Slats Roll Forming Machine's Advantages:
l When the shutter door is opened and closed, check whether there is any pile of material. Especially the fire shutter door is linked with the fire protection system. The fire shutter door is often damaged or tilted due to improper operation.
l Ordinary electric rolling shutters should also pay special attention to the fact that the curtains should be on the scene at the same time as the curtains are opened and closed. In the unlikely event that the curtains are tilted or the track is stuck, the curtains should be stopped and opened in time so as not to cause greater damage to the motor and the curtain. hurt.
l While the curtain is opening and closing, pedestrians and running are strictly forbidden, because the curtains are connected by the connecting piece when the curtain is opened and closed, and there are few unsafe factors in the motor and the transmission shaft. Therefore, when the curtain is started, it should try not to run.
BOSJ established in 2004, as a professional china roll former manufacturer, BOSJ has won a worldwide reputation in this field. Our products have broad markets in Southeast Asia, India, North and South America, Western Asia, Russia, and Australia. We provide door shutter roll forming machine, automatic rolling shutter machine, shutter door roll forming machine, rolling shutter machine, shutter machine and etc. Want to know more, please contact us.
Send product request
Other supplier products
C & U CHANNEL ROLL FORMING MACHINE | Like other hollow sections, steel channel is rolled from steel sheet into C or U shapes. It consists of a wide "web" and two "flanges". The flanges... | |
BILLET COMPRESSOR WHEELE | The impeller of billet compressor consists of hub, blade and cover. The cover of the submerged pump impeller and the rear cover are divided. The co... | |
ALUMINIUM ROLL FORMING MACHINE | How to Prevent Rust Treatment of Aluminum Profile Cold Forming Machine The gear oil used in the machine tool of the aluminium forming machinemus... | |
Fire Control Cabinet End Cap Roll Forming Machine | Structure Of Equipment It's combined with leveler,servo-feeder/punching, roll forming, cutting and other technology The equipment-roll forming equ... | |
CABLE TRAY ROLL FORMING MACHINE | Cable trays are becoming more and more widely used in modern buildings. Traditional manual production can no longer meet the demand, and the indust... |