EPS Sandwich Panel Line
laminator forcorrugated sandwich panelis a integrated production line consisting of a roll forming machine and a sandwich panel laminating system. The roll forming machine and the laminating system can be operated separately. The roll forming machine consists of decoiler, main body and post-cut equipment. The laminating system consists of feeding, glue, heating, laminating and post-cutting. The whole machine is under control of PLC.The line can produce single corrugated sheet, and can also produce the sandwich panel with rabbet joint and corrugated sandwich panel.
Main technical parameter for EPS Sandwich Panel Line
|
Sandwich panel specification |
Length: Min cutting length is 2 mMax cutting length is 15mWidth: (see profile drawing)Thickness: (see profile drawing) |
|
raw material specification |
coil thickness: 0.4~0.6 mm (steel be flat without ups and downs,deformation and bending)sheet yield stress: ≤235MPacoil max width: 1200 mm (tolerance±2mm)coil max weight: 4Tcoil ID: Φ500 and Φ600 mmcoil OD: Φ1000 mmEPS material: density is≥18㎏/m3,unstraight of each side ≤1㎜/m,,curve ≤3㎜/m,surface be even, ineveness smaller than 1.5mm/m, EPS material single piece length more than 3m.Material suitable shape: see profile drawingMaterial suitable width: minimum shall be 1/2mm of the finished panel width |
|
Machine line specification |
Work line speed : 1000-3000 mm/min (frequency speed adjustment).Attention: depend on glue brand, temperature and proficiency of operators.Machine length : about 40 mWorking height: 1050 mm(panel output height)Laminating effective length: 7.5 mControl way: adopt industrial computer PLCTotal power: about 35 kwPower: 380V/3phase/50 Hzcontrol voltage: 24 V/110 V/220 Vpneumatic: 0.7 Mpa (self prepared by factory) best working temperature:around 25℃Layout drawing for EPS Sandwich Panel Line |
Send product request
Other supplier products
 |
dry wall Roll Forming Machine | Thedry wall Roll Forming Machineadopts the Individual Roller Station, drives by Gear Box. Adjust and install the Spacers to produce different wid... |
 |
Speedway Guardrail Roll Forming Machine | This is a Non-stop punching with high efficiencySpeedway Guardrail Roll Forming Machine.It can be used in a variety of guardrail, such as guardra... |
 |
cut to length line | Thecut to length lineused to make mental coil into the even plate whose width is decided on you through procedure of decoiling, leveling, cut to ... |
 |
steel floor plate roll forming machine | This steel floor plate roll forming machine is primarily used for the integrated production of trailer floor plates. This diamond plate roll fo... |
 |
Polyurethane Sandwich Panel Machine | Polyurethane Sandwich Panel Machinehas the best functions: such as anti-flaming, thermal insulation, hest insulation, sound insulation, waterpr... |
Same products
 |
Chinese Auto Tube Cutting Machine GT-ACT29 | Seller: Zhaoqing City Greater Technology Co., Ltd | Auto tube cutting machine use to cut tubes for heating elements automatically. Mainly for heater ... |
 |
Anti-corrosion SSAW Steel Pipe | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-corrosion SSAW Steel Pipe Anti-corrosion steel pipes are used in petroleum, chemical, gas, ... |
 |
1435mm Digital Track Gauge with Bluetooth Use in Railway | Seller: Wuhan Liankeliji Rail Equipment Co., Ltd | The railway digitaltrack gaugeis mainly used for the measurement of railway track gauge, superele... |
 |
NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool | Seller: Zhejiang Huaqi Information Technology Co., LTD | ● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ... |
 |
DC series high efficiency european jaw crusher | Seller: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd. | Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste... |
