EPS Sandwich Panel Line
laminator forcorrugated sandwich panelis a integrated production line consisting of a roll forming machine and a sandwich panel laminating system. The roll forming machine and the laminating system can be operated separately. The roll forming machine consists of decoiler, main body and post-cut equipment. The laminating system consists of feeding, glue, heating, laminating and post-cutting. The whole machine is under control of PLC.The line can produce single corrugated sheet, and can also produce the sandwich panel with rabbet joint and corrugated sandwich panel.
Main technical parameter for EPS Sandwich Panel Line
|
Sandwich panel specification |
Length: Min cutting length is 2 mMax cutting length is 15mWidth: (see profile drawing)Thickness: (see profile drawing) |
|
raw material specification |
coil thickness: 0.4~0.6 mm (steel be flat without ups and downs,deformation and bending)sheet yield stress: ≤235MPacoil max width: 1200 mm (tolerance±2mm)coil max weight: 4Tcoil ID: Φ500 and Φ600 mmcoil OD: Φ1000 mmEPS material: density is≥18㎏/m3,unstraight of each side ≤1㎜/m,,curve ≤3㎜/m,surface be even, ineveness smaller than 1.5mm/m, EPS material single piece length more than 3m.Material suitable shape: see profile drawingMaterial suitable width: minimum shall be 1/2mm of the finished panel width |
|
Machine line specification |
Work line speed : 1000-3000 mm/min (frequency speed adjustment).Attention: depend on glue brand, temperature and proficiency of operators.Machine length : about 40 mWorking height: 1050 mm(panel output height)Laminating effective length: 7.5 mControl way: adopt industrial computer PLCTotal power: about 35 kwPower: 380V/3phase/50 Hzcontrol voltage: 24 V/110 V/220 Vpneumatic: 0.7 Mpa (self prepared by factory) best working temperature:around 25℃Layout drawing for EPS Sandwich Panel Line |
在线联系供应商
Other supplier products
 |
3-wave guardrail roll forming machine | 3-wave guardrail roll forming machine is used to produce 3-wave guardrails as per customer requirements. The 3-wave guardrail making machine ma... |
 |
cassette type roll forming machine | Thiscassette type roll forming machineis the special equipment for continuous rolling and cold-forming on steel sheet. There are two cassettes ... |
 |
Cable tray roll forming machine | Cable tray roll forming machineis capable of making different sizes of cable trays. The cable trays produced by our cable tray roll forming machi... |
 |
plate slitting machine | Theplate slitting machineis a kind of slitting equipment, which is mainly used in cutting and producing of cold-rolled steel coil, stainless st... |
 |
Refrigerator Panel Roll Forming Machine | Refrigerator Panel Roll Forming Machineadopts Cantilevers drive by gear, this type roll former advantage: adjust the plate width quickly. After c... |
Same products
 |
全自动开料机 GT-ACT29 | 卖方: 肇庆古雷特科技有限公司 | 自动管材切割机用于自动切割加热元件的管材。主要用于大规模生产中的加热器制造。适用于铜管、铁管、不锈钢管、铝管等。*主要详情1. 自动送料、切割、断管和自动卸管。2. 可以裁剪成两种不同的长度。3... |
 |
Anti-corrosion SSAW Steel Pipe | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-corrosion SSAW Steel Pipe Anti-corrosion steel pipes are used in petroleum, chemical, gas, ... |
 |
1435mm 数显轨距尺 | 卖方: 武汉联科瑞际轨道设备有限公司 | 铁路数显轨距尺主要用于铁路线路轨距、超高、查照间隔、护背距离 的测量。可供工务维修、大修、工程测量及其他有关部门线路作业时使用。 该仪器测量速度快、使用方便，白天、夜间均可使用，是工务、工程部门... |
 |
NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool | 卖方: Zhejiang Huaqi Information Technology Co., LTD | ● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ... |
 |
DC series high efficiency european jaw crusher | 卖方: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd. | Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste... |
