Aluminum Foil Panel Production Line
Introduction of aluminum foil panel production line:
The aluminum foil panel production line is a kind of specialized equipment for producing laminated panels with the middle layer of anti-combustion polyurethane or polyisocyanurate or phenolic polyfoam and with aluminum foil as the top and bottom face layers. The laminated panel is between 20 and 30 mm in thickness, 1200mm in width, length determined by the customer. The panel is mainly used as the ventilation pipe for central air-conditioners. Different insulating panels with other soft facing layers could also be produced on the line.
The operation principle of aluminum foil panel production line is as follows: raw materials of rigid-foam plastic are delivered into the mixing head through the metering pump on the injection machine and then injected onto the bottom facing sheet going to conveyors along with the top superficial sheet. Between the upper and lower conveyors, the liquid materials are hardened into shape, after which the laminated sheet is edge-trimmed and, by an automatic tracking cutting mechanism, cut into segments according to the preset length.
The aluminum foil panel production line has already passed the hi-and neo-tech product identification carried out by the Economic and Trade Commission of Jiangsu Province and Jiangsu Science and Technology Department, being evaluated as one of the first-batch high and new products of Jiangsu Province (Product No.: 041111G0025N) and listed as a National-Level New Product Project (Project No.: 2004ED690193).
Main Technical Parameters:
|
Specification of produced pane |
l1200 mm×20~30 mm (Width × Thickness), Length on request |
|
Linear speed of production |
2~5 m/min |
|
Maximum embossing speed |
15 m/min |
|
Agitating speed |
4500 r/min |
|
Reciprocating times of injection head per minute |
60 |
|
Maximum temperature of hot-air circulating |
70℃ |
|
Laminating length of laminator |
18 m |
|
Maximum clearance between conveyors |
250 mm |
|
Total power (KVA) |
85~125 |
|
Overall external dimensions |
40340×5365×3636 mm (Length × Width × Height) |
|
External dimensions of embossing machine unit |
7050×3200×1600 mm (Length × Width × Height) |
|
Weight |
≈33 tons |
Send product request
Other supplier products
 |
Decoration Sandwich Panel Production Line | Decoration sandwich panel production line is used to make custom-made decoration sandwich panels with aluminum sheet on the one side and aluminum... |
 |
Rigid Polyurethane Foam Cutting Machine | Characteristics of rigid polyurethane foam cutting machine:1. The rigid polyurethane foam cutting machine includes cutter-tightening wheels, havi... |
 |
Two Components Low Pressure PU Form Injection Machine | Constituents of PU Form Injection Equipment:Our PU form injection machine is consisted of mixing head, loading tanks, metering pump unit, hot-wat... |
 |
RXY Type Polyurethane Injection Equipment | Introduction:The RXY type polyurethane injection equipment is kind of specialized equipment used to produce rigid and half-rigid PU filter end ca... |
 |
Large Flow Rate Low Pressure Polyurethane Injection Machine | Introduction:This large flow rate low-pressure polyurethane injection machine developed on our own is a kind of low-pressure injection equipment ... |
Same products
 |
Chinese Auto Tube Cutting Machine GT-ACT29 | Seller: Zhaoqing City Greater Technology Co., Ltd | Auto tube cutting machine use to cut tubes for heating elements automatically. Mainly for heater ... |
 |
Anti-corrosion SSAW Steel Pipe | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-corrosion SSAW Steel Pipe Anti-corrosion steel pipes are used in petroleum, chemical, gas, ... |
 |
1435mm Digital Track Gauge with Bluetooth Use in Railway | Seller: Wuhan Liankeliji Rail Equipment Co., Ltd | The railway digitaltrack gaugeis mainly used for the measurement of railway track gauge, superele... |
 |
NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool | Seller: Zhejiang Huaqi Information Technology Co., LTD | ● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ... |
 |
DC series high efficiency european jaw crusher | Seller: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd. | Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste... |
