Aluminum Foil Panel Production Line
Introduction of aluminum foil panel production line:
The aluminum foil panel production line is a kind of specialized equipment for producing laminated panels with the middle layer of anti-combustion polyurethane or polyisocyanurate or phenolic polyfoam and with aluminum foil as the top and bottom face layers. The laminated panel is between 20 and 30 mm in thickness, 1200mm in width, length determined by the customer. The panel is mainly used as the ventilation pipe for central air-conditioners. Different insulating panels with other soft facing layers could also be produced on the line.
The operation principle of aluminum foil panel production line is as follows: raw materials of rigid-foam plastic are delivered into the mixing head through the metering pump on the injection machine and then injected onto the bottom facing sheet going to conveyors along with the top superficial sheet. Between the upper and lower conveyors, the liquid materials are hardened into shape, after which the laminated sheet is edge-trimmed and, by an automatic tracking cutting mechanism, cut into segments according to the preset length.
The aluminum foil panel production line has already passed the hi-and neo-tech product identification carried out by the Economic and Trade Commission of Jiangsu Province and Jiangsu Science and Technology Department, being evaluated as one of the first-batch high and new products of Jiangsu Province (Product No.: 041111G0025N) and listed as a National-Level New Product Project (Project No.: 2004ED690193).
Main Technical Parameters:
Specification of produced pane |
l1200 mm×20~30 mm (Width × Thickness), Length on request |
Linear speed of production |
2~5 m/min |
Maximum embossing speed |
15 m/min |
Agitating speed |
4500 r/min |
Reciprocating times of injection head per minute |
60 |
Maximum temperature of hot-air circulating |
70℃ |
Laminating length of laminator |
18 m |
Maximum clearance between conveyors |
250 mm |
Total power (KVA) |
85~125 |
Overall external dimensions |
40340×5365×3636 mm (Length × Width × Height) |
External dimensions of embossing machine unit |
7050×3200×1600 mm (Length × Width × Height) |
Weight |
≈33 tons |
在线联系供应商
Other supplier products
Three Components Low Pressure Polyfoam Injection Machine | Introduction of polyfoam injection machine: This three components low-pressure polyfoam injection machine is especially suitable for manufactur... | |
Small Flow Rate Polyurethane Pouring Machine | The small flow rate polyurethane pouring machine is applicable to make PU elastomers using MOCA as cross linking agent, pre-polymer or vacuum deb... | |
Normal Temperature Elastomer Polyether Injection Machine | Technical Parameters of Normal-Temperature Type Elastomer Polyether Injection Machine: Mixing Ratio Material A: Material B =100:90 ... | |
EVA Foam Cutting Machine | Introduction:EVA foam cutting machine is applicable to cut all kinds of flexible material like EVA and rigid foam. It is widely used in the produ... | |
Flame Lamination Machine | Introduction:The advent of flame lamination machine is demanded by further-processing requirement of textile. Nowadays the development of cap-mak... |
Same products
STAINLESS STEEL SPIRAL WELDED PIPE PRODUCTION LINE | 卖方: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | The stainless steel spiral welded pipeunit adopts front-swing intermittent production, which is a... | |
螺旋洗石机 | 卖方: 爱迪机械制造有限公司 | 产品特点:螺旋洗石机是砂洗机的一种,又分为单螺杆洗石机和双螺杆洗石器。砂砾石材料中的土壤和水混合的目的是从设备上的出口排出,而砂砾石材料在螺旋装置的作用下从顶部的排放口排出,从而实现砂砾石材料的... | |
Push Ball Valve | 卖方: Zhejiang Carbo Bronze Co., LTD | Because the push to connect flanged bronze ball valve is designed and manufactured with a push ro... | |
滚筒筛振动筛水泥浆高频筛分机 | 卖方: 爱迪机械制造有限公司 | 产品特点:1.结构简单,维修量小,投资少,振动小,噪音小。2.物料按近似圆形运动轨迹前进,物料分散快,进料均匀,筛分效率高。3.轴承采用机油润滑,使用寿命长。4.便于与其他设备配套,提高自动化程... | |
单缸液压圆锥机 | 卖方: 爱迪机械制造有限公司 | 产品特点:1.应用范围广:可破碎坚硬岩石,同一宿主通过更换衬板可获得多种空腔类型,适应各种应用。中碎型有一个稳定且大的进料口,用于物料的中碎(甚至粗碎)。2.该产品具有良好的颗粒形状。优化组合破... |