Complete Spiral Welded Pipe Production Line
DescriptionThis 1200mm×12mm (B=1500/1050mm) front swing type spiral welded pipe roll forming machine is designed and manufactured by our high-tech institute with advanced national and international technology. It has been found to completely meet with the API-5L, GB9711.1～1997, ASTM&BSI standards by advanced design, reliable performance, light weight and economical investment.Our customers can use the welded pipe production line to make all kinds of pipes for transporting and structuring.
Application1. Gas transporting steel pipes2. Low pressure fluid transporting steel pipes, city gas transporting, water supply and drainage pipes3. Steel pipes in city heat supply network and power plant, city building and industrial structure pipes4. Others
Technical performance and data:
|
Raw Material Data |
|
|
Coil Outer Dia |
Φ1000~2000mm |
|
Inner Dia |
Φ610~760mm |
|
700~1500mm or 600~1050mm (Below is just for examples) |
|
|
Thickness |
8~12mm |
|
Material |
SS400 normal carbon steel and low alloy steel |
|
Crescent |
≤10/10000mm |
|
Turriform |
＜30mm |
|
15/10t |
|
|
Final Steel Pipes Data |
|
|
Pipe Outer Dia |
Φ800~1200mm |
|
Wall Thickness |
8~12mm |
|
Length |
10~25 m |
|
Spiral Swing Angle |
45~78º |
|
Spiral Mill Data |
|
|
Mode or Type Data Unit Mode: Frontal swinging, center positioning Forming Way: Three-roll bending, four-row outside control roll sizing |
|
|
Welding |
Double-side sub-merged arc automaticwelding |
|
Inside Welder |
Single-wire,DC-1500 Welding |
|
Outside Welder |
Single-wire,DC-1500 Welding |
|
Welding Speed |
|
|
Feeding Speed |
|
|
Annual Output |
10,000-30,000tons per year |
|
Pressed Air Source |
|
|
Plant Area(advanced by ours) 168m×24m×2 plant |
See the advance layout by ours,all the final sizes and layout should be confirmed after measuringand base on your plant sizes and flows. |
|
Electric Power |
AC380V,50HZ (can be adjusted as per customer requirement) |
|
Control Power |
AC220V,50HZ |
|
Total PowerOf The Mill |
~400KW |
Process:Uncoiling→pinching & leveling→electric vertical rolling→hydraulic cutting & butt-welding→electric vertical rolling→edge milling→surface cleaning→manual vertical rolling→main feeding & delivery→pre-bending & guiding→forming→inside welding→outside welding→plasma cutting→pulling out→finished product inspection→collecting
Send product request
Other supplier products
 |
Spiral Welded Pipe Mills | DescriptionThis series of welded tube mill machine is used to produce the low-pressure transporting pipe and structure pipes. The spiral welded... |
 |
Cut to Length Line | DescriptionCut to length production line is made up of coil car, decoiler, entry support device, width adjustor device, leveling machine, gauge t... |
 |
Spiral Pipe Production Line | DescriptionThis 1220mm×16mm (B=1500mm) front swing type spiral welded pipe roll forming machine is designed and manufactured by our high-te... |
 |
Tube Straightening Machine | DescriptionTube straightening machine is mainly used to straighten metal profiles, rods, tubes and wire rods. It changes the straightness of bar ... |
 |
Straight Seam Welded Pipe Hydrotester | DescriptionHydrostatic testing machine for straight seam welded pipe is mainly used to have a pressure test on the straight seam welded pipe. T... |
Same products
 |
Chinese Auto Tube Cutting Machine GT-ACT29 | Seller: Zhaoqing City Greater Technology Co., Ltd | Auto tube cutting machine use to cut tubes for heating elements automatically. Mainly for heater ... |
 |
Anti-corrosion SSAW Steel Pipe | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-corrosion SSAW Steel Pipe Anti-corrosion steel pipes are used in petroleum, chemical, gas, ... |
 |
1435mm Digital Track Gauge with Bluetooth Use in Railway | Seller: Wuhan Liankeliji Rail Equipment Co., Ltd | The railway digitaltrack gaugeis mainly used for the measurement of railway track gauge, superele... |
 |
NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool | Seller: Zhejiang Huaqi Information Technology Co., LTD | ● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ... |
 |
DC series high efficiency european jaw crusher | Seller: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd. | Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste... |
