Spiral Welded Pipe Mills
DescriptionThis series of welded tube mill machine is used to produce the low-pressure transporting pipe and structure pipes. The spiral welded pipe mill is equipped with a whole spiral welded pipe line and necessary finishing equipment.Material:hot roll or slitting cut steel coil
Specifications of the Welded Tube Mill Machine
|
Coil OD |
Φ1500-2000mm |
|
ID |
Φ610-760mm |
|
900-2000mm |
|
|
Thickness |
6-25.4mm |
|
Material |
Normal carbon steel,low carbon steel Max yield strength is less than 48kg/mm2480Mpa-X70 API HR Q235, Q345, X42-X70(X70≤19.1,Q235≤25.4mm) |
|
Side Curvature |
≤10mm/10m |
|
Tower |
＜30mm |
|
Max Weight |
40T |
Product Parameters:
|
Pipe Diameter |
Φ400-Φ2500mm (16inch-100inch) |
|
Thickness |
6-25.4 mm Max yield strength is less than 48kg/mm2-X70 API HR Q235, Q345, X42-X70(X70≤19.1,Q235≤25.4mm |
|
Helix angle |
45°-78° |
|
Maxpipe thread pitch |
2400mm |
|
Length |
8-12m |
|
Configuration |
One set 40T crane and the other20T crane |
|
Capacity |
~1600KW(Including the beveller,testers ,welders and so on) |
Parameters and Flow of ProcessParameters
|
Front Swiveling |
Left Helix |
|
Forming Form |
Three rollers outside controlled |
|
Positioning Form |
CenterPosition |
|
Welding Speed |
|
|
Feeding Speed |
|
|
Welding Mode |
double sides submerged arc welding |
|
Inside Welded Machine Outside Welded Machine |
(2 nozzles) I: DC-1500 ⅡAC-1200(t≥12.7mm) (2 nozzles) I: DC-1500 II: AC-1200(t≥12.7mm) |
|
Pressure Air |
Working Process of the Spiral Welded Pipe Mill:(coil car) → (uncoil) → (aligning) → (5 roll leveling) → (aligning) → (shearing and cross welding) → (aligning) → (milling) → (aligning) → milling→ (aligning) → (steel plate cleaning) → (driving) → (pre-bending) → forming → (inside welding) → (outside welding) → (cut to length) → (output distributing) → (on-line UT testing) → (welding flux disposing) → (X-ray testing) → (end-facing) → (hydro-static testing) → (collecting&storage)
Send product request
Other supplier products
 |
Double metal composite welded pipe mill | DescriptionThe double metal composite welded pipe mill/production line is mainly applied for making pipes. Firstly, it will flat the metal compos... |
 |
End Facing and Beveling Machine | DescriptionFlat head chamfering machine is mainly used for flatting the end of spiral welded pipe and finish the edges. This pipe end beveling ma... |
 |
Stainless steel welded pipe mill/production line | DescriptionThe stainless steel welded pipe mill/production line is mainly used in production of stainless steel pipes. Firstly, it slits stainles... |
 |
Spiral Welded Pipe End Facing and Beveling Machine | DescriptionSpiral welded pipe flat head chamfering machine is mainly used to flat the pipe end of spiral welded pipes and also to finish the edge... |
 |
Welded Pipe Mill | Welded Pipe Mill DescriptionWelded tube mill is complete equipment for welding steel pipes. It rolls the strip or plate then welds the tube to s... |
Same products
 |
Chinese Auto Tube Cutting Machine GT-ACT29 | Seller: Zhaoqing City Greater Technology Co., Ltd | Auto tube cutting machine use to cut tubes for heating elements automatically. Mainly for heater ... |
 |
Anti-corrosion SSAW Steel Pipe | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-corrosion SSAW Steel Pipe Anti-corrosion steel pipes are used in petroleum, chemical, gas, ... |
 |
1435mm Digital Track Gauge with Bluetooth Use in Railway | Seller: Wuhan Liankeliji Rail Equipment Co., Ltd | The railway digitaltrack gaugeis mainly used for the measurement of railway track gauge, superele... |
 |
NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool | Seller: Zhejiang Huaqi Information Technology Co., LTD | ● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ... |
 |
DC series high efficiency european jaw crusher | Seller: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd. | Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste... |
