CNC Router Spindle 3.0kw Model GDZ-100-3.0 100MM 380V 24000RPM 12A 400Hz
CNC Router Spindle GDZ-100-3.0 for Sale
All cnc router parts, one-stop shopping
From
Technical Parameter of CNC Router Spindle
Voltage | 380V
Power | 3.0KW
RPM | 24,000
Currency | 12A
Frequency | 400Hz
Spindle Diameter | 100mm
Collet Size | ER20
Cooling Mode | Water Cooled
The difference between water-cooled spindle and air-cooled spindle
- Due to this point, water cooled cnc router spindle is more suitable to do the long time carving work than air-cooled spindle. But this is not mean that air cooled spindle cannot do carving jobs, it can do also, just its service life will get reduced after working for more than 4 hours continuously. For example, the carving jobs will take 6 hours to finish; machine with air cooled spindle have to work 4 hours first, then take a rest like 30 minutes, next start again to finish the carving. This way will have no harm on spindle. It will do harm to air cooled spindle to make it work for more than 4 hours continuously. While if same case to water cooled cnc router spindle, you can let it work for 6 hours without rest until finish the jobs.
Send product request
Other supplier products
 |
Spiral Cut Compression Cutter Router Bit | Why it’s called compression spiral router bit The part near the tip is designed as upcut style; while the other part near the bottom is desig... |
 |
Nesting CNC Router with Nesting Software for Plate Fitment | Nesting CNC Router EagleTec-1325TL2 is a pneumatic tool changer cnc router with some special designs which is convenient for plate fitment producti... |
 |
Two Flutes Spiral Upcut Router Bit | Spiral upcut router bit is one type of spiral cut router bits which is used on CNC, other automatic router and hand-held router. It eliminates debr... |
 |
Air Cooled CNC Spindle 3.5kw ER25 Model. GDZ93X82-3.5 For Sale | Air cooled cnc spindle for sale Full range of cnc spare parts, one-stop shopping here From Air cooled cnc spindle is widely used on basic c... |
 |
Woodworking Carousel ATC CNC Router Machining Center | ATC CNC router has another name of CNC router machining center or woodworking machining center. EagleTec-1530CATC is equipped with carousel type au... |
Same products
 |
TCT saw blades | Seller: Qingdao jiho machine Co.,ltd | TCT saw blades have high hardness and high wear resistance, and can maintain continuous cutting a... |
 |
laser machine 9060P | Seller: JINAN SEQUOYATEC CO.,LTD | * Working size: 900*600mm * RECI W2(80-95W) * Stepper motor and driver * China 15 square guide * ... |
 |
laser machine 6050A | Seller: JINAN SEQUOYATEC CO.,LTD | * Working size: 600*500mm * 50W * Stepper motor and driver * 15 square guide * CW3000 water chill... |
 |
laser machine 9060 | Seller: JINAN SEQUOYATEC CO.,LTD | * Working size: 900*600mm * RECI W2 90W * Stepper motor and driver * 15 square guide * CW3000 wat... |
 |
DSP A11 Control System Original Richauto Controller for CNC RouterDSP A11 Control System Original Richauto Controller for CNC Router | Seller: Suzhou Rico Machinery Co.,Ltd | DSP A11 Control System Original Richauto Controller for CNC Router RichAuto A11E A11S with USB in... |
