CNC Router Spindle 3.0kw Model GDZ-100-3.0 100MM 380V 24000RPM 12A 400Hz

CNC Router Spindle GDZ-100-3.0 for Sale

All cnc router parts, one-stop shopping

From https://www.eaglecnctec.com/products/241-spindle-motor-gdz-100-3.html

 

Technical Parameter of CNC Router Spindle

Voltage | 380V

Power | 3.0KW

RPM | 24,000

Currency | 12A

Frequency | 400Hz

Spindle Diameter | 100mm

Collet Size | ER20

Cooling Mode | Water Cooled

 

The difference between water-cooled spindle and air-cooled spindle

  1. Due to this point, water cooled cnc router spindle is more suitable to do the long time carving work than air-cooled spindle. But this is not mean that air cooled spindle cannot do carving jobs, it can do also, just its service life will get reduced after working for more than 4 hours continuously. For example, the carving jobs will take 6 hours to finish; machine with air cooled spindle have to work 4 hours first, then take a rest like 30 minutes, next start again to finish the carving. This way will have no harm on spindle. It will do harm to air cooled spindle to make it work for more than 4 hours continuously. While if same case to water cooled cnc router spindle, you can let it work for 6 hours without rest until finish the jobs. 

 



在线询价

至: Jinan EagleTec CNC Machinery Co.,Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Mach3 Motion Card Mach3 Hardware
Mach3 Motion Card Mach3 Hardware Mach3 is a very popular CNC system in Europe and America. The system includes two parts, hardware and software. Hardware is mach3 motion card and U...
VFD spindle inverter variable frequency drive
VFD spindle inverter variable frequency drive VFD is short of variable frequency drive. VFD inverter is used to control the speed of spindle motor. To get good finishing on job, different mater...
Flat Bottom V Shaped Long CEL Engraving Router Bits
Flat Bottom V Shaped Long CEL Engraving Router Bits Long CEL flat bottom engraving bits belong to deep relief engraving tools field. This bits set is designed with long CEL, especially for thick mate...
Cove Router Bit Double Ogee T.C.T Router Bits
Cove Router Bit Double Ogee T.C.T Router Bits Description of round bottom router bits Type: Classical double ogee bits, T.C.T router bits  Material: Solid Carbide Quality Grade: N, A (N...
Water Cooled Spindle Motor HQD 2.2kw 3.2kw 4.5kw 5.5kw for CNC Router
Water Cooled Spindle Motor HQD 2.2kw 3.2kw 4.5kw 5.5kw for CNC Router Water cooled spindle motor for sale All cnc router spare, one-stop shopping here From https://www.eaglecnctec.com/products/153-hqd-spindle-3.2-4....
供应产品

Same products

CNC Machine Spindle Replacement GDZ-100-3 24000RPM 3.0KW 400Hz 380V
CNC Machine Spindle Replacement GDZ-100-3 24000RPM 3.0KW 400Hz 380V 卖方: Jinan EagleTec CNC Machinery Co.,Ltd. High Frequency cnc machine spindle replacement for Sale From www.eaglecnctec.com All cnc router...
Spindle drive Delta VFD055E43A VFD037E43A VFD037E23A VFD055E43A
Spindle drive Delta VFD055E43A VFD037E43A VFD037E23A VFD055E43A 卖方: Jinan EagleTec CNC Machinery Co.,Ltd. Spindle Drive Delta VFD for Sale All cnc router spare parts, one-stop shopping here From https:...
High Frequency Spindle Air Cooled GDF46-18Z/3.5 GDF60-18Z/4.5 GDF60-18Z/6.0
High Frequency Spindle Air Cooled GDF46-18Z/3.5 GDF60-18Z/4.5 GDF60-18Z/6.0 卖方: Jinan EagleTec CNC Machinery Co.,Ltd. High Frequency Spindle Air Cooled GDF46-18Z/3.5 GDF60-18Z/4.5 GDF60-18Z/6.0 From https://www.eag...
Water Cooled Spindle Motor HQD 2.2kw 3.2kw 4.5kw 5.5kw for CNC Router
Water Cooled Spindle Motor HQD 2.2kw 3.2kw 4.5kw 5.5kw for CNC Router 卖方: Jinan EagleTec CNC Machinery Co.,Ltd. Water cooled spindle motor for sale All cnc router spare, one-stop shopping here From https://w...
CNC Router Spindle 3.0kw Model GDZ-100-3.0 100MM 380V 24000RPM 12A 400Hz
CNC Router Spindle 3.0kw Model GDZ-100-3.0 100MM 380V 24000RPM 12A 400Hz 卖方: Jinan EagleTec CNC Machinery Co.,Ltd. CNC Router Spindle GDZ-100-3.0 for Sale All cnc router parts, one-stop shopping From https://ww...