.

CAT40 Tool Holder Collet Chucks for CNC Milling Machine

CAT40 Tool Holder Collet Chucks for CNC Milling Machine

CAT tools were developed by an American company Caterpillar? and are used in CNC machinery.
CAT tapered tool holders are similar to BT tapered tool holders. The difference between CAT and BT is the flange style, thickness, and the thread for the pull stud is a different size.
CAT tools are also known as Caterpillar “V-flange”. CAT tool holders are designed as flexible devices that will accommodate different tools within a certain range of sizes. They will accept both imperial and metric sized tools. They consist of a taper (shank) and a holding head (flange). The Morse taper (male part) fits in the spindle’s female coupling, providing precise positioning of the tool and ability to switch it quickly.

CAT 40 ER collet chuck toolholders features: 1, Balanced to 25,000 RPM at G2.5 2, T.I.R. 0.0001" measured from taper to collet pocket 3, Taper ground to AT3 or better specification ensures 80% or more contact with spindle to reduce harmonics and improve runout tolerance 4, Inside bore are precision turned to engage a better contact with retention knob's pilot to increase rigidity 5, Precision turning surface finish provide perpendicular contact with the flange of retention knob to increase rigidity 6, Holder hardness : 58 HRC 7, Coolant through and Anti Rust design

Plastic tool holder forks for CAT40 toolholders also are available here.

supplies a wide range of high quality CNC tooling system and spare parts, if any needs, welcome your inquiry.

Official website:

cncsparetools.c0m

ricocnc.c0m



Send product request

To: Suzhou Rico Machinery Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

High Speed HSK63F Tool Holder HSK63F-ER40-80 Cones Woodworking Toolholders
High Speed HSK63F Tool Holder HSK63F-ER40-80 Cones Woodworking Toolholders High Speed HSK63F Tool Holder HSK63F-ER40-80 Cones Woodworking Toolholders The HSK F63 high speed tool holders are made for use on precisionand, a...
ISO30 Tool Holders CNC Collect Chucks for HSD Spindle ATC CNC Routers
ISO30 Tool Holders CNC Collect Chucks for HSD Spindle ATC CNC Routers ISO30 Toolholders for HSD Spindle ATC CNC Routers This is a 50mm flange diameter ISO30 toolholder which is commonly used on most common woodworkin...
Soft Vacuum Pod Gasket for Morbidelli and SCM Routech Point to Point Machines
Soft Vacuum Pod Gasket for Morbidelli and SCM Routech Point to Point Machines Soft Vacuum Pod Gasket for Morbidelli and SCM Routech Point to Point MachinesThese rubber vacuum pods seals and gaskets are for the CNC woodworking...
SCM Morbidelli CNC Vacuum Pod Sucker for Point to Point CNC Router
SCM Morbidelli CNC Vacuum Pod Sucker for Point to Point CNC Router SCM Morbidelli CNC Vacuum Pod Sucker for Point to Point CNC Router These CNC vacuum pods and cups are for SCM / Morbidelli CNC routers andGreda Si...
140x115x17mm Vacuum Suction Pad Pod Covers for CNC Router
140x115x17mm Vacuum Suction Pad Pod Covers for CNC Router Vacuum Suction Pad Pod Cover for CNC Router These rubber replacement suction plates are working with pod and rail cnc vacuum pods for CNC router...
All supplier products

Same products

TCT saw blades
TCT saw blades Seller: Qingdao jiho machine Co.,ltd TCT saw blades have high hardness and high wear resistance, and can maintain continuous cutting a...
laser machine 9060P
laser machine 9060P Seller: JINAN SEQUOYATEC CO.,LTD * Working size: 900*600mm * RECI W2(80-95W) * Stepper motor and driver * China 15 square guide * ...
laser machine 6050A
laser machine 6050A Seller: JINAN SEQUOYATEC CO.,LTD * Working size: 600*500mm * 50W * Stepper motor and driver * 15 square guide * CW3000 water chill...
laser machine 9060
laser machine 9060 Seller: JINAN SEQUOYATEC CO.,LTD * Working size: 900*600mm * RECI W2 90W * Stepper motor and driver * 15 square guide * CW3000 wat...
DSP A11 Control System Original Richauto Controller for CNC RouterDSP A11 Control System Original Richauto Controller for CNC Router
DSP A11 Control System Original Richauto Controller for CNC RouterDSP A11 Control System Original Richauto Controller for CNC Router Seller: Suzhou Rico Machinery Co.,Ltd DSP A11 Control System Original Richauto Controller for CNC Router RichAuto A11E A11S with USB in...