CAT40 Патроны цанговых патронов для фрезерного станка с ЧПУ
CAT40 Tool Holder Collet Chucks for CNC Milling Machine
CAT tools were developed by an American company Caterpillar? and are used in CNC machinery.
CAT tapered tool holders are similar to BT tapered tool holders. The difference between CAT and BT is the flange style, thickness, and the thread for the pull stud is a different size.
CAT tools are also known as Caterpillar “V-flange”. CAT tool holders are designed as flexible devices that will accommodate different tools within a certain range of sizes. They will accept both imperial and metric sized tools. They consist of a taper (shank) and a holding head (flange). The Morse taper (male part) fits in the spindle’s female coupling, providing precise positioning of the tool and ability to switch it quickly.
CAT 40 ER collet chuck toolholders features: 1, Balanced to 25,000 RPM at G2.5 2, T.I.R. 0.0001" measured from taper to collet pocket 3, Taper ground to AT3 or better specification ensures 80% or more contact with spindle to reduce harmonics and improve runout tolerance 4, Inside bore are precision turned to engage a better contact with retention knob's pilot to increase rigidity 5, Precision turning surface finish provide perpendicular contact with the flange of retention knob to increase rigidity 6, Holder hardness : 58 HRC 7, Coolant through and Anti Rust design
Plastic tool holder forks for CAT40 toolholders also are available here.
supplies a wide range of high quality CNC tooling system and spare parts, if any needs, welcome your inquiry.
Official website:
cncsparetools.c0m
ricocnc.c0m
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
4.5KW Air Cooled ATC Spindle Motor Automatic Tool Change Spindle | 4.5kw Air Cooled Automatic Tool Change Spindle Chinese ATC Spindle Motor for CNC RouterAfter serveral years development, Chinese spindle proformanc... |
 |
Soft Vacuum Pod Gasket for Morbidelli and SCM Routech Point to Point Machines | Soft Vacuum Pod Gasket for Morbidelli and SCM Routech Point to Point MachinesThese rubber vacuum pods seals and gaskets are for the CNC woodworking... |
|
|
CAT40 Патроны цанговых патронов для фрезерного станка с ЧПУ | CAT40 Tool Holder Collet Chucks for CNC Milling Machine CAT tools were developed by an American company Caterpillar? and are used in CNC machinery... |
 |
BT40 точность ER Металлообрабатывающие инструментальные держатели CNC фрезерные станки | BT40 Precision ER Metalworking Toolholding Tool Holders for CNC Milling MachinesThese BT40 tool holders are metalworking toolholding BT holders wit... |
 |
CNC Vacuum Suction Pods for Biesse Rover CNC Routers | CNC Vacuum Suction Pods for Biesse Rover CNC RoutersThese vacuum pods and cups are for Biesse CNC routers, replacement pod for using with Biesse Ro... |
Похожие товары
 |
Пильные полотна ТСТ | Продавец: Qingdao jiho machine Co.,ltd | Пильные полотна TCT обладают высокой твердостью и высокой износостойкостью, а также могут сохраня... |
 |
лазерный станок 9060P | Продавец: Цзинань Чжунму Интеллектуальные технологии Лтд | * Рабочий размер: 900 * 600 мм * RECI W2 (80-95 Вт) * Шаговый двигатель и водитель * Китай 15 ква... |
 |
лазерный станок 6050А | Продавец: Цзинань Чжунму Интеллектуальные технологии Лтд | * Рабочий размер: 600 * 500 мм * 50 Вт * Шаговый двигатель и водитель * 15 квадратных направляющи... |
 |
лазерный станок 9060 | Продавец: Цзинань Чжунму Интеллектуальные технологии Лтд | * Рабочий размер: 900 * 600 мм * RECI W2 90 Вт * Шаговый двигатель и водитель * 15 квадратных нап... |
 |
DSP A11 Control System Original Richauto Controller for CNC RouterDSP A11 Control System Original Richauto Controller for CNC Router | Продавец: Suzhou Rico Machinery Co.,Ltd | DSP A11 Control System Original Richauto Controller for CNC Router RichAuto A11E A11S with USB in... |
