Procedures to Debug the Die of Wood Pellet Press

• 

As its name implies, wood pellet mill is a machine used to pelletize those agricultural and forestry wastes into pellets of great value. After adjusting the pelletizing system well, you can operate the wood pellet making machine at normal. While, remember, you should open the discharging door on operating door during the working process.

Sequence for launching the parts of wood pellet mill should be dynamo first, agitator second and feeder last. When materials enter into the agitator, you should open the steam valve meanwhile. The saturated steam pressure should vary from the 0.2MPa to 0.4MPa. The steam temperature should be about 130-150 ℃.

For the water content in raw materials, it should be proper. If water content is higher than the rated, raw materials will be caked on the surface of moulding dies and block the die holes. On the contrary, if water content in raw materials is lower than the rated, softening degree of raw materials will be insufficient. As a result, the working efficiency of wood pellet mill will become poorer and poorer.

In general, before theworking process of wood pellet machine, you’d better notice the water content of raw materials. After raw materials enter into the granulating room, you should firstly notice the discharging condition of finished products and then the current changes. Under the normal discharging, if the electric current is less than the rated, you can increase the flow of raw materials and steam until the current reaches to the rated.

Leave messages on website to get thediscount of FTM wood pellet mill!

Fote Heavy Machinery:

Fote Official Email:

Send product request

To: Henan Fote Heavy Machinery Co,. Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

	Waiting to See the Post-era of Mobile Crusher	When the crusher industry is confronted with dilemmas, many manufacturers switch their attention to the after-sales service. The switch means that ...
	Selecting Principle for the FTM Stone Crusher	Stone crusher, mainly used for making the sand aggregates, can be used in fields like railway, building, water conservancy and mining, etc. The fol...
	Frequent Checks for the Coal Briquetting Machine	It is necessary to make daily maintenance and checks for the coal briquette plant. As to the maintenance work, you’d better refer to the inst...
	Coal Briquette Machine is Worthy of Your Trust	Someone may question that the resources of oil and natural gas can enough take the place of coal energy. While, for most countries, to realize this...
	Solutions to Low Balling of Coal Briquette Machine	Coal briquette machine can be widely used for many industries. Coal briquetting plant may have some failures during the working process. How to sol...

All supplier products

Same products

	HSC Paper Sheeting Machine	Seller: Suzhou Paper Saw King Technology Co.,Ltd	HSC Paper Sheeting Machine Product Description HSC Paper Sheeting Machineincorporates an advanc...
	Bottom Feed Slitting Rewinder	Seller: Suzhou Paper Saw King Technology Co.,Ltd	Bottom Feed Slitting Rewinder Product Description The bottom feed slitting rewinderreceives pap...
	HX Tape Laminating Slitting Rewinder	Seller: Suzhou Paper Saw King Technology Co.,Ltd	HX Tape Laminating Slitting Rewinder Product Description The HX Tape Laminating Slitting Rewind...
	Full Servo Band Saw Paper Slitter	Seller: Suzhou Paper Saw King Technology Co.,Ltd	Full Servo Band Saw Paper Slitter Product Description The Full Servo Band Saw Paper Roll Slitte...
	Z1500 Circular Saw Paper Roll Slitter	Seller: Suzhou Paper Saw King Technology Co.,Ltd	Z1500 Circular Saw Paper Roll Slitter Main Characteristics Z1500 Circular Saw Paper Roll Slitte...