.

Isolated Positive and Negative 0-5V to RS232/RS485 A-D Converter ISO 4021 Series

Analog data acquisition isolated AD conversion amplifier module. Shunyuan technology patented products
Product Description
ISO4021 Series Isolated 0-±100mV,0-±10V,4-20mA,0-±20mA to RS232/RS485 A-D Converter
Model selection:
ISO 4021 U(A)□ - □

U/A: Input voltage or current signal Output: communication interface
U1:0-5V A1:0-1mA 232/485: Output is RS-232 or RS-485 interface
U2:0-10V A2:0-10mA
U3:0-75mV A3:0-20mA
U4:0-2.5V A4:4-20mA
U5:0-±5V A5:0-±1mA
U6:0-±10V A6:0-±10mA
U7:0-±100mV A7:0-±20mA
U8:Customized A8:Customized


Remark:When the communication interface is RS232, it should connect with RXD and TXD port; when the communication interface is RS485, it should connect with DATA+ and DATA- Port. RS232 and RS485 can’t work at the same time.
E.g.
1: ISO 4021 A4-232/485 Means 4-20ma signal input, output is RS232 or RS485
2: ISO 4021 U1-232/485 Means 0-5V signal input, output is RS232 or RS485
3: ISO 4021 U5-232/485 Means 0-±5V signal input, output is RS485 or RS232


ISO 4021 A-D Converter General Parameters:
(typical @ +25℃,Vs is 24VDC)
Input: Voltage / Current
Accuracy: 0.05%
Input imbalance: ±0.1 uA/℃
Temperature Drift: ±15 ppm/℃ (±30 ppm/℃, max)
Input Resistance: 50Ω (4-20mA/0-20mA/0-±20mA current input)
100Ω (0-10mA/0-±10mA current input)
1KΩ (0-1mA/0-±1mA current input)
>1MΩ(voltage input)
Band width: -3 dB 10 Hz
Switching rate: 10 Sps
Common mode restraint(CMR): 120 dB(1kΩ Source Imbalance @ 50/60 Hz)
Normal mode restraint(NMR): 60 dB (1kΩ Source Imbalance @ 50/60 Hz)
Input Port protection: over-voltage/over current protection
Communications: protocol RS-485 or RS-232 ASCII protocol and MODBUS RTU communication protocol
Baud rate(300、600、1200、2400、4800、9600、19200、38400bps)software configuration
address(00H~FFH)software configuration
Response Time:100 ms max
Operation Power Supply: +8 ~ 50 VDC wide power supply range, internal anti-reverse & over-voltage protection
watt consumption: < 1W
Operation Temperature: - 45 ~ +80℃
Operation Humidity: 10 ~ 90% (non-condensing)
Storage Temperature: - 45 ~ +80℃
Storage Humidity: 10 ~ 95% (non-condensing)
Isolation withstand voltage: between input and output: 3KVDC,1 minute,stray current 1mA
Output and power are common-ground.
Endure Impact Voltage: 3KVAC, 1.2/50us(peak value)
Dimensions: 83 mm x 37 mm x 51mm
Weight: 72g


Send product request

To: ShenZhen SunYuan Technology Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

SY LED1 Current Signal Digital Panel Meter
SY LED1 Current Signal Digital Panel Meter .Low cost module design ,easy to connected with converter and instrument &meters by PIM. .two wire passive working way, Need no other auxiliary...
4-digit LED display Current Loop Isolated Control Display Meter
4-digit LED display Current Loop Isolated Control Display Meter .-Industrial site 4-20mA signal isolation monitoring and long distance transmission. .-Anti-interference & isolation among signal input channel...
Factory OEM FV/FI Frequency to DC Current/Voltage Converter
Factory OEM FV/FI Frequency to DC Current/Voltage Converter Features 1)Precision level:0.1 0.2 0.5 2)Very high linearity value(nonlinearity < 0.1%) 3)3KVDC isolation between power supply and signal channe...
0-5V/0-10V isolation amplifier manufacturer
0-5V/0-10V isolation amplifier manufacturer PWM Pulse Width Signal to 4-20mA/0-5V/10 Transmitter/ConverterCharacteristics:● Sensitive distinguish, Rapid response● Extremely high linearity in ...
DC current / voltage dual output signal conditioner amplifier
DC current / voltage dual output signal conditioner amplifier Features: ● Low cost, small size. Directly soldered on the PCB board mounted.SIP 16 anti- fire UL94V-0 package ● Easy to use, no zero adjustment ex...
All supplier products

Same products

Industrial Power Distribution with Enhanced Safety
Industrial Power Distribution with Enhanced Safety Seller: Wenzhou Shangfeng Electric Co.,Ltd. The Waterproof Industrial Socket Box is designed to provide a protected and organized housing sol...
China factory Top shaft oil differential pressure switch BP-CMS01 for power station
China factory Top shaft oil differential pressure switch BP-CMS01 for power station Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China factory Top shaft oil differential pressure switch BP-CMS01 for power station Our company ...
China supplier differential pressure switch CMS-1 power plant spare parts
China supplier differential pressure switch CMS-1 power plant spare parts Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China supplier differential pressure switch CMS-1 power plant spare parts Sold by YOYIK. Deyang ...
Electric lunch box
Electric lunch box Seller: O&K GROUP LIMITED Looking for Quality Products? From electronics to home essentials, fashion to industrial supplies...
Professional Electrical Safety Equipment for Power Work
Professional Electrical Safety Equipment for Power Work Seller: Shanghai Yongjin Electric Technology Co.,Ltd. Electric Safety Tools are designed for electrical installation, maintenance, inspection, and repa...