.

WSD-VZF(R)-27 Handcart Indoor High Voltage Vacuum Load Switch

WSD-VZF(R)-27 Handcart Indoor High Voltage Vacuum Load Switch

Overview

Main uses and scope of application

WSD-VZF(R) -27/630-25 removable vacuum load switch+ fuse combination electrical appliances (hereinafter referred to as combination electrical appliances) is a new generation of three-phase AC 50Hz, rated voltage 27kV indoor switchgear developed according to unique design concept and market demand. It is widely used in indoor armoured air insulated switchgear. It meets the requirements of GB3804-2004, GB16926-1997 and other standards. Under normal operating conditions, as long as the technical parameters of the vacuum switch are within the range, it can ensure the safe and reliable operation of the corresponding voltage level of the power grid.

Environmental Conditions for Use

The ambient temperature should not be higher than + 40℃, not lower than – 10℃(storage and transportation allowed at – 30℃)

Elevation does not exceed 1500m.

Relative humidity: the daily average is not more than 95%, the monthly average is not more than 90%, the daily average of saturated vapor pressure is not more than 2.2 x 10-3 Mpa, and the monthly average is not more than 1.8 x 10-3 Mpa.

Earthquake intensity does not exceed 8 degrees.

No fire, explosion danger, serious pollution, chemical corrosion and violent vibration.

STRUCTURAL CHARACTERISTICS

Primary structure

The VZF (R) -27 series combination electric apparatus combines current limiting fuse and vacuum interrupter organically by means of "fixed pole" to form a series circuit. The vacuum switch body (vacuum interrupter) is responsible for switching on and off various load currents and overload currents, and the current limiting fuse is responsible for the breaking of short circuit currents.

Overall structureof High Voltage Vacuum Load Switch

The pole pole and the actuator are arranged in one form, which simplifies the transmission link, makes the output characteristics of the mechanism more in line with the load characteristics required by the vacuum switch, reduces the energy consumption and improves the mechanical reliability.

The three-phase pole of a combined electrical appliance is formed by an automatic pressure gel process (APG) to form a "F" pole. The pole column structure avoids the influence of dust and temperature on the insulation of the vacuum arc extinguishing outdoor, reduces the pollution of the shell of the arc chamber, and improves the reliability; the three-phase fuse is installed on the top of the "F" pole, and the structural design takes full account of the electric field of the vacuum switch in the middle switch cabinet. Distribution greatly reduces the adverse effects of inductive components on cabinet withstand voltage test, and improves the insulation strength of cabinet products.

Operating mechanism

The operating mechanism adopts the VS1 spring operating mechanism with the largest consumption in the existing market. Through long-term use and improvement, the performance of the mechanism has been very stable and reliable.

Assembly and Maintenance

The assembly and maintenance of the combined electric appliance are relatively time-saving and labor-saving because of its fixed type and stable and reliable operation mechanism.

Indoor high voltage vacuum load switchis widely used in indoor armored air-insulated switchgear. The Load Switch meets the requirements of GB3804-2004, GB16926-1997 and other standards.



Send product request

To: Wisdom Automatic Equipment (Wuxi) Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Y5WZ-17-45 AC Gapless MOA
Y5WZ-17-45 AC Gapless MOA AC gapless metal oxide arrester(hereinafter referred to as arrester) is used to protect AC electrical equipment of corresponding voltage level from...
WSD-ZW32-24D Outdoor AC high voltage vacuum circuit breaker
WSD-ZW32-24D Outdoor AC high voltage vacuum circuit breaker WSD-ZW32-24D Outdoor AC high voltage vacuum circuit breaker Overview WSD-ZW32-24DOutdoor AC high voltage vacuum circuit breaker (hereinafter referr...
WSD-ZW32-24GD Outdoor AC high voltage vacuum circuit breaker
WSD-ZW32-24GD Outdoor AC high voltage vacuum circuit breaker WSD-ZW32-24GD Outdoor AC high voltage vacuum circuit breaker Overview WSD-ZW32-24GDOutdoor AChigh voltage vacuum circuit breaker(hereinafter referr...
Intelligent Transmission and Distribution Automation System
Intelligent Transmission and Distribution Automation System Intelligent Transmission and Distribution Automation System This product is the monitoring unit of the overhead line power grid. It cooperates with...
Axial fan heater
Axial fan heater Axial fan heater Axial fan heater is a kind of intelligent switch cabinet equipment, if you want to buy high quality heater, you can choose us! Our...
All supplier products

Same products

Extruder Open Screw Barrel
Extruder Open Screw Barrel Seller: NANJING LESUN SCREW CO.,LTD The extruder open screw barrelare used in the feeding section, the natural exhausting section an...
Backward Pumping Kneading Block
Backward Pumping Kneading Block Seller: NANJING LESUN SCREW CO.,LTD The backward pumping kneading blockplays a role of adjusting the fullness of the material and ex...
Extruder Side-Feed Barrels
Extruder Side-Feed Barrels Seller: NANJING LESUN SCREW CO.,LTD Barrel plays an importante role inside extruder. Barrel and screw elements are corporated each ot...
Extruder Side-Feed Barrels
Extruder Side-Feed Barrels Seller: NANJING LESUN SCREW CO.,LTD Barrel plays an importante role inside extruder. Barrel and screw elements are corporated each ot...
Extruder Spare Parts for Plastic pelletizing
Extruder Spare Parts for Plastic pelletizing Seller: NANJING LESUN SCREW CO.,LTD Extruder Spare Partsfor Plastic pelletizing Our components can operate in plastics industries, s...