TJH-1 Weighing Load Cell
TJH-1 is a kind of load cell sensor for weight measurement. These classic products(TJH-1 weighing load cell) are mature and reliable and have obtained utility model patents. The unique T-type overload protection device has the strong anti-overload capability. It has a bottom plate with 4 mounting holes for easy installation. Optional integrated standard signal output, such as 4~20mA or 0~5V three-wire load cell amplifier. Suitable for belt scales, batching scales, etc.
Specifications of TJH-1 measurement of force using strain gauge load cell
|
Technical Parameter |
|
|
Rated Load |
30N~1.5 kN |
|
Comprehensive Precision |
|
|
Sensitivity |
|
|
Creep |
±0.05% FS/30min |
|
Zero Output |
±1% FS |
|
Temperature Effect On Zero |
±0.05% FS/10℃ |
|
Temperature Effect On Output |
±0.05% FS/10℃ |
|
Operating Temperature Range |
-20~+65 ℃ |
|
Input Resistance |
380±10 Ω |
|
Output Resistance |
350± 3 Ω |
|
Insulation Resistance |
＞5000 MΩ |
|
Load Cell Mode Of Connection |
Input+: Red |
|
Input-: Black |
|
|
Output+: Green |
|
|
Output-: White |
|
|
Safe Load Limit |
150% FS |
|
Bridge Voltage |
Reference 10V DC |
|
Material |
Alloy Steel |
|
Amplifier Mode of Connection |
Power: Red |
|
Public Side: Blue |
|
|
Output: White |
|
Features of TJH-1 Weighing Load Cell
Compression only load cell
Comes with indenter and mounting base plate
Unique T-type overload protection
Optional built-in transmitter
Eccentric load compensated
Utility model patents
There are many load cell suppliers, but we are one of the best choices for you.
Send product request
Other supplier products
 |
Load Cell For Weight Measurement | What is a load cell? Load cell is a kind of sensor, which means a load cells are used for measuringelectrical signal. There are various kinds of lo... |
 |
Load Cell Signal High-speed Collector | TCHS load cell signal high speed collector is used to capture very short instantaneous force, the highest frequency can reach 3500 times per second... |
 |
Load Cell Amplifiers | The weighing amplifier/transmitter is a signal amplification device. Usually used in conjunction with a sensor, the load cell sensor amplifier can ... |
 |
TJL-8 Column Type Rod End Load Cell | With the characteristics of the wide range of measurements, safe and reliability, our column type load cellis suitable for the measurement and cont... |
 |
TG One Load Cell Data Acquisition Management Software | In the work, we often encounter the situation of using multiple sensors at the same time, and hope to save the collected data, so as to facilitate ... |
Same products
 |
S Type Load Cell | Seller: Anhui Tianguang Sensor Co.,Ltd | The TJL-1 series load cells are s shaped load cell. This sensor adopts a classic S-type structure... |
|
|
TJH-1 Weighing Load Cell | Seller: Anhui Tianguang Sensor Co.,Ltd | TJH-1 is a kind of load cell sensor for weight measurement. These classic products(TJH-1 weighing... |
 |
TJH-1B Weighing Load Cell | Seller: Anhui Tianguang Sensor Co.,Ltd | High precision, easy installation, good moisture resistance, suitable for electronic belt scales,... |
 |
TJH-17 Oil Field Load Cell | Seller: Anhui Tianguang Sensor Co.,Ltd | Oil sender sensoris suitable for data acquisition of oil field wellheads. It has the characterist... |
 |
TG One Load Cell Data Acquisition Management Software | Seller: Anhui Tianguang Sensor Co.,Ltd | In the work, we often encounter the situation of using multiple sensors at the same time, and hop... |
