Dry air-core filtering reactor high voltage and medium voltage
The filter reactor, usually connected in series in the capacitor circuit, provides a low-impedance path for a certain harmonic, avoiding excessive harmonics entering the system.
Use environment:
1) Use environment: indoors, outdoors
2) Ambient temperature: -40 °C ~ +45 °C (or according to user requirements)
3) Altitude: ≤1000m (or according to user requirements)
4) Installation and operation location: It should be free of severe vibration or bumps, and can withstand earthquakes with seismic intensity of 8 degrees without damage.
5) Installation location: No harmful gas, steam, conductive or explosive dust
6) Pay attention to ventilation during indoor use
7) Maximum wind speed: no more than 35m/s
8) Relative humidity: The monthly average is no more than 90%, and the daily average is no more than 95%.
Note: Please contact with our company for special requirements. We are willing to wholeheartedly meet your requirements.
Send product request
Other supplier products
 |
Dry iron-core shunt reactor high voltage and medium voltage | Use environment 1) Use environment: indoors 2) Ambient temperature: -40 °C ~ +45 °C (or according to user requirements) 3) Altitude: ≤10... |
 |
reduce harmonics low active loss fast response speed Magnetic-valve Controllable Reactor MCR-type SVC | MCR (Magnetic-valve Controllable Reactor) Type SVC MCR type SVC uses self-coupling DC excitation and limiting magnetic saturation work mode, which ... |
 |
Thyristor Controlled Reactor TCR-type SVC Chinese manufacturer | TCR (Thyristor Controlled Reactor) Type SVC The TCR type SVC device is mainly composed of TCR (thyristor control reactor) and FC (filter capacitor ... |
 |
Dry iron-core series reactor high voltage and medium voltage | In series with the high-voltage capacitor bank, access 6 ~ 35kV power system, used to limit the shunt capacitors in combination with the inrush cur... |
 |
Dry air-core current-limiting reactor high voltage and medium voltage | Current-limiting reactors, limit the short-circuit current, and reduce the short-circuit current to the allowable value of the device. Use environm... |
