Dry magnetic-bias arc suppression coil
The operating principle of the arc suppression coil compensation device is to compensate the difference between the inductor current flowing through the fault point and the capacitive current by 180 degrees. After the compensation, the fault current flowing through the fault point is less than 5A, thus reducing the power system's occurrence due to the single-phase intermittent arc grounding.
Other supplier products
|
|
widely used suppress harmonic high-voltage filter and compensation FC filter capacitor |
The load of iron and steel, petrochemical, metallurgy, coal, printing and dyeing industries will generate a large number of harmonics during the wo... |
|
|
Dry iron-core shunt reactor high voltage and medium voltage |
Use environment 1) Use environment: indoors 2) Ambient temperature: -40 °C ~ +45 °C (or according to user requirements) 3) Altitude: ≤10... |
|
|
Dry air-core current-limiting reactor high voltage and medium voltage |
Current-limiting reactors, limit the short-circuit current, and reduce the short-circuit current to the allowable value of the device. Use environm... |
|
|
Dry air-core series reactor high voltage and medium voltage |
The series reactor, installed in the capacitor circuit, plays a role in suppressing the inrush current when the capacitor circuit is put in. At the... |
|
|
Dry air-core filtering reactor high voltage and medium voltage |
The filter reactor, usually connected in series in the capacitor circuit, provides a low-impedance path for a certain harmonic, avoiding excessive ... |
All supplier products
Same products
