sell 13.56MHz rfid module JMY620C Interface: I2C, UART
JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned by impedance analyzer; so the module has excellent read/write performance and stability. Though the wire can reach 10m, but the performance is good. Normally the wire should be 60cm that is the module's best performance and stability. JMY620 adopts surface mount installation form. Small size is a major feature of JMY620. JMY620 has many kinds of funtions and it can support various contactless IC card under international standards. Meanwhile it can support the cards from different suppliers. Designer classified&integrated the operation commands for contactless IC cards. In this situation, the uesr can operate it easily via sending simple commands. The most important features for JMY620 is that it can support contactless IC cards(T=CL) fully. It can send and receive more than 256 Bytes APDU commands and also support FSDI=8.
Qualifications:
• PCD: NXP MF RC522, NXP MF RC523
• Working frequency: 13.56MHz
• RF standard: ISO14443A, ISO14443B
• Operating distance: 100mm(depending on card and antenna design)
• Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
• Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
• Auto detecting card: Supported, default OFF; Can be set
• Interface: IIC, UART(selected by SPS pin, recommend to use IIC)
• Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps
• Max.command length: 511 Bytes
• Interface level: 3.3V (TTL level; 5V tolerance)
• Power supply: DC 3.3V + 5V(±0.5V)
• Power consumption: Working mode:80mA; Idle:100uA
• Dimension: 22mm×35mm
• Package: Surface Mount
• Weight: about 10g
• Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
• Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
• ISP: Supported
• RoHS: Compliant
Other supplier products
|
|
sell 13.56MHz rfid module JMY601H Interface: UART |
JMY601 series are RFID reader/writer module with UART serial ports. JMY601 has various functions and supports multi ISO/IEC standard of contactless... |
|
|
sell 13.56MHz HF rfid reader MR810 Interface: USB PC/SC |
MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, I... |
|
|
sell 13.56MHz HF rfid reader MR761 Interface: USB (HID standard) |
MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data b... |
|
|
sell 13.56MHz HF rfid module JMY680H Interface: IIC, UART, RS232C or USB |
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of cont... |
|
|
sell 13.56MHz rfid module JMY620C Interface: I2C, UART |
JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. T... |
All supplier products
Same products
