PTC Thermistor Over-current Protector
PTC thermistors current protector, also called PTC thermistor resettable fuses, protect load against over-current, overload, short circuit. No need for replacement, resume protective function after a short cooling-down time.Current Protection PTC Thermistor Description
Ceramic PTC (positive temperature coefficient) thermistors are used instead of conventional fuses to protect load, such as motors, transformers, or electronic circuit, against overcurrent for circuit protection. PTC thermistor protector not only respond to inadmissibly high currents but also if a preset temperature limit is exceeded. PTC thermistor over-current protector limits the power dissipation of the whole circuit by increasing their resistance and thus reducing the current to a harmless residual value. In contrast to conventional fuses, PTC thermistor resettable fuses do not have to be replaced after elimination of the fault but resume their protective function immediately after a short cooling-down time.
PTC Thermistor Over-current Protector Application
It applies in the over-current overload and short circuit protection of transformers, battery charger, switches, switch power supply, adaptor, meter, instrumentation, apparatus, electronic coils, control panels, air conditioner, automotive electron, etc.
Operating Principle of PTC Thermistor for Overload Over-current Protection
The operating principle is as indicated in the following. When a circuit is in the normal status, the current through PTC is lower than the rated current and PTC thermistor protector is in the normal state with small resistance value, which will not affect the normal operation of the protected circuit. In case of some fault in the circuit and the current is greater than the rated current, the PTC thermistor protector will become hot quickly and present a high resistance state, which sets the circuit relatively "off" to protect the circuit from damage. After the fault is removed, PTC thermistor protector will automatically restore its low resistance state and the circuit will resume normal operation.
Normally, when PTC thermistor is used as an overcurrent protection component, it is preferred to select maximum operating current, maximum operating voltage and proper specifications. Furthermore such factors should be taken into consideration as the dimensions of the components, rated zero-power resistance, operating temperature range, etc.
Send product request
Other supplier products
Screw thread water heater boilers thermistor temperature sensor | Application: thermistor temperature sensor probe for temperature measurement of liquid, water, air, etc. Typical application coffee maker, tea ket... | |
Aluminum tube thermistor temperature sensor probe | Application: Aluminum tube thermistor temperature sensor probe assembly for coffee maker, cookie maker, bread maker, roaster, toaster and other foo... | |
Threaded stainless steel tube thermistor temperature sensor | Threaded stainless steel tube thermistor temperature sensor probe for temperature measurement of liquid, water, air, etc. Ideal for vessel and pip... | |
PTC Thermistor for Telecom Over-current Protection | Telecom PTC Thermistor Description This series of ceramic PTC (positive temperature coefficient ) thermistors help provide protection against pow... | |
PTC Thermistors Limit Temperature Sensor | PTC thermistor can be ideal devices for temperature detection, monitoring, indicating, limiting and over (excessive) temperature protection, due it... |
Same products
0154003.DR DIODO FUSE BOARD MNT 3A 125VAC VDC SMD LITTEFUSE INC. | Seller: ZK Electronic Technology Co., Limited | Product Details Category: Diode PN: 0154003.DR Brand:/ Description:0154003.DR DIODO FUSE BOAR... | |
0154001.DRT FUSE FUSIVEL SMD, OMNI BLOCK, T 1A LITTELFUSE | Seller: ZK Electronic Technology Co., Limited | If you need, please feel free to contact us. Thank you very much! Please contact: ZK Electronic... | |
Maxi Blade Fuse | Seller: Dongguan Tianrui Electronics Co., Ltd | Maxi Blade Fuse,Blade Fuse | |
ASTA UK PLUG BSI Fuse 3 pins XR-318A | Seller: Guangdong XiongRun Electrical Co., Ltd | Product: 3 Píns U.K. plug Standard: BS1363 Rated Current: 3A/5A/10A/13A Rated Voltage:250V... | |
DC Fuse Link | Seller: YUEQING FEEO ELECTRIC CO.,LTD awy | Yueqing Feeo Electric Co.,Ltd is one of the professional China dc fuse link manufacturers a... |