.

polyimide FEP tape

This product is compounded tape by one-sided or two-sided film coated with F46 gum, finished products is after dry and cutting. This tape is applicable to electrical winding wire with class H insulating materials and the half minutes melting to shape at 350~380°C when application.

  1. Technical requirements
  2. Tape dry and level off, without bubble and the impurities. 2. Size 2.1. Length: Each volume tape on the one dish or roll, its length not less than 300 m, joints number are not more than three, the shortest length of each volume not less than 10 m. 2.2. Width: The width of the tape and its allowable deviation is 10m +/- 0.4 mm, 15m + /-0.4 mm, 20m + /-1 mm, 25m + /-1 mm, other width specifications of the tape to be supplied according to user’s needs. 2.3. Thickness: Tape nominal thickness and its allowable deviation

Thickness(um)

33

35

38

40

50

65

Allowable deviation(um)

±1

±1

±1

±1

±2

±2

Note:according to customer's demand supplying various thickness of the tape, allowabledeviation is plus or minus 0.003 mm. or according to user needs supplies tapes.

Serial number

Item name

Unit

Index

1

Tensile strength

MPa

%

 

N/25mm

 

≥80

≥35

 

2

Elongation at break

3

Stripping force ≥

Tape ~Tape

Tape~Copper

4

Electric strength

v/um

≥140

5

Surface resistance

Ω

≥1.0X1014

6

Volume resistance

Ω.M

≥1.0X1010

7

Relative permittivity 48~62Hz

-

8

Dielectric power factor 48~62 Hz ac

-

≤4.0X10-3

Note: For No 5 and 6, to be tested before cutting.


Send product request

To: New Century (Tianjin) Polyimide Films Insulating Materials Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Corona Resistance polyimide Film (Kapton CR, FCR)
Corona Resistance polyimide Film (Kapton CR, FCR) Corona resistance polyimide films ,not only with ordinary polyimide film electrical properties, good heat resistance and resistance chemicals, but ...
Polyimide Film
Polyimide Film The polyimide film is to be produced by cast method, which has High temperature resistance, resistance to radiation and excellent dielectric proper...
 polyimide FEP tape
polyimide FEP tape This product is compounded tape by one-sided or two-sided film coated with F46 gum, finished products is after dry and cutting. This tape is applic...
All supplier products

Same products

Foil Surface Pipe Insulation
Foil Surface Pipe Insulation Seller: Langfang Clear Chemical Building Materials Co., Ltd When it comes to choosinghigh-performance insulation for pipesin commercial, industrial, or resid...
Phenolic Foam Ductwork
Phenolic Foam Ductwork Seller: Langfang Clear Chemical Building Materials Co., Ltd Phenolic foam ductworkis a lightweight duct system that combines phenolic foam's excellent insula...
Pre-insulated Phenolic Duct Board
Pre-insulated Phenolic Duct Board Seller: Langfang Clear Chemical Building Materials Co., Ltd Pre-insulated phenolic duct boardis a next-generation HVAC ducting solution that combines thermal...
YCS S-550A Oversized Thickened Insulation Pad for Tin Plating
YCS S-550A Oversized Thickened Insulation Pad for Tin Plating Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, Description YCS Tin-planted ARC Pad Silicone Mat with 0.4mm 0.5mm 0.8mm Slot for mobile ...
Phenolic Paper Laminated Sheet
Phenolic Paper Laminated Sheet Seller: Xuchang Yongteng Insulation Material Co., Ltd The product is made of an insulating impregnated paper soaked with phenolic resin, through baking...