SW Series -Seawater Desalination RO Membranes UC SW-8040-400HR
UltraClean SW series are high-end RO membranes featuring a supporting layer with high compression resistance, thick and dense flawless thin film layer. It has good wear and chemical degradation resistance.
The membrane element does not need postprocessing during the manufacturing. It tolerates a wide range of pH, which enables more efficient and rougher cleaning using regular acid and base, therefore it has high cleaning efficiency. The membrane system can operate in long term under lower pressure due to thorough cleaning, therefore the membrane performs better during its service life. It can significantly reduce operation costs, and bring the best long-term economy to the seawater desalination system.
Seawater Desalination RO MembranesFeatures
Advanced membrane technology with innovative thin layer composite membrane design.
More consistent performance with less fouling requiring less frequent cleaning and change-outs.
100% dry-stored membrane maximizing shelf life.
Products Highlight
High rejection rate of salts
High compression and fouling resistance and high cleaning efficiency
Cost-saving of seawater desalination system
Notes
Permeate flow for individual elements may vary ±15 percent from the value specifed.
Active membrane area guaranteed ±4%.
Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending upon feedwater characteristics and operating conditions.
General Information
The first full tank of permeate should be discarded, DO NOT use this initial permeate for drinking water or food preparation.
Keep membrane moist at all times after initial wetting.
To stop growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution.
Send product request
Other supplier products
 |
SW Series -Seawater Desalination RO Membranes UC SW-8040-365HRLE/34 | UltraClean SW series are high-end RO membranesfeaturing a supporting layer with high compression resistance, thick and dense flawless thin film lay... |
 |
BW Series-Brackish Water RO Membranes UC BW-4040-82 | BW RO membrane elementsare mainly used for brackish water desalination. They provide excellent, stable and consistent membrane performance for indu... |
|
|
SW Series -Seawater Desalination RO Membranes UC SW-8040-400HR | UltraClean SW series are high-end RO membranes featuring a supporting layer with high compression resistance, thick and dense flawless thin film la... |
 |
BW Series-Brackish Water RO Membranes UC BW-8040-400FR/34 | BW RO membrane elements are mainly used for brackish water desalination. They provide excellent, stable and consistent membrane performance for ind... |
Same products
 |
YCS S-550A Oversized Thickened Insulation Pad for Tin Plating | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | Description YCS Tin-planted ARC Pad Silicone Mat with 0.4mm 0.5mm 0.8mm Slot for mobile ... |
 |
Phenolic Paper Laminated Sheet | Seller: Xuchang Yongteng Insulation Material Co., Ltd | The product is made of an insulating impregnated paper soaked with phenolic resin, through baking... |
 |
Epoxy Sheet | Seller: Xuchang Yongteng Insulation Material Co., Ltd | 3240Epoxy Fiberglass Cloth Laminated Sheet is made of ethoxyline and glass cloth by thermal compr... |
 |
F-DMD | Seller: Xuchang Yongteng Insulation Material Co., Ltd | 6641 F-DMD consists of two layers of Polyester Fiber Non-woven Fabric and a single layer of Polye... |
 |
Polyimide Film Tape with Adhesive | Seller: Xuchang Yongteng Insulation Material Co., Ltd | Polyimide adhesive tape is made of polyimide film with acrylic resin adhesive. Application:The h... |
